how to replace frigidaire water filter

Step-by-Step Guide: How to Replace Your Frigidaire Water Filter

By Daniel Davis
AD

When it comes to the efficiency and purity of your drinking water, the Frigidaire water filter plays a crucial role. Regularly replacing your Frigidaire water filter ensures that you and your family enjoy refreshing, clean water, free from impurities and contaminants. Here's a step-by-step guide on how to replace yours effortlessly.

Before we dive in, ensure you have the following tools and parts ready: the new Frigidaire water filter, a small bowl or cup, and a screwdriver (Philips or flathead, depending on your refrigerator model).

Identifying and Removing the Old Filter

Before installing the new filter, you need to identify and remove the old one. Here's how:

AD
How To: Replace The Water Filter in Your Frigidaire Refrigerator Using Filter Model ULTRAWF
How To: Replace The Water Filter in Your Frigidaire Refrigerator Using Filter Model ULTRAWF
(VIDEO) How Do You Remove a Stuck Refrigerator Water Filter?
(VIDEO) How Do You Remove a Stuck Refrigerator Water Filter?
Replace a Fridgaire PureSource ULTRA water and air filter
Replace a Fridgaire PureSource ULTRA water and air filter

1. Locate the water filter housing: In most Frigidaire refrigerators, the water filter housing is positioned at the top of the fridge, behind the bottom, right-hand corner panel. Some models may have it on the bottom right side or behind the right-hand side kickplate.

Models with the filter at the top

1. Remove the cover or grille: Using a screwdriver, remove the screws securing the cover or grille, and gently pull it off.

How to Replace Your Refrigerator Water Filter | Maytag
How to Replace Your Refrigerator Water Filter | Maytag
Refrigerator Water Filter Replacement Instructions
Refrigerator Water Filter Replacement Instructions

2. Push the old filter up and twist: Reach into the housing, and locate the old filter. Push it up and twist it counterclockwise to unlock it. The filter will release from the housing.

Models with the filter at the bottom

1. Moving the crisper drawer: To access the water filter housing, you'll need to move the crisper drawer to the right or left as far as possible.

AD

2. Access the filter: Locate the filter, and follow the same procedure as top-filter models: push up and twist counterclockwise to unlock and remove it.

Preparing and Installing the New Filter

Once you've safely removed the old filter, it's time to prepare and install the new one. Here's how to do it:

1. Rinse the new filter: Before installation, run cold water through the new filter for about 5 minutes to activate it. This step is crucial, as it helps remove any resins or loose carbon from the filter.

AD

Positioning the new filter

1. Align the filter: Make sure the new filter's black arrow or housing mark is aligned with the direction of water flow in the filter housing. The water flow arrow is usually marked on the housing or marked on the refrigerator's exterior near the water dispenser.

2. Push and twist: Insert the new filter into the housing, and push it in slightly. Once you feel resistance, turn the filter clockwise until it locks into place.

Reassemble the refrigerator

1. Align the cover or grille: Once the new filter is securely in place, position the cover or grille back on the housing, and ensure it's properly aligned.

AD

2. Tighten screws: Using a screwdriver, replace the screws and tighten them, ensuring the cover or grille is securely attached.

Congratulations! You've just successfully replaced your Frigidaire water filter. To ensure your new filter performs optimally, remember to replace it every 6 months, or sooner if indicated by the filter change indicator on your refrigerator. Enjoy clean, refreshing water!”

AD