how to replace fiskars paper trimmer blade

How to Replace Fiskars Paper Trimmer Blade

By Ashley Wilson
AD

Is your Fiskars paper trimmer no longer cutting with the precision it once did? It might be time to replace the blade. Replacing the blade is a quick and easy process, and it can help you maintain the longevity of your paper trimmer. Here's a comprehensive guide on how to replace your Fiskars paper trimmer blade.

The first step is to understand that Fiskars has two types of paper trimmers, the Original and the Performance. Both use the same type of blade, but they have slightly different disassembly processes. Don't worry, I'll guide you through both.

Preparing Your Paper Trimmer for Blade Replacement

Before you start, make sure you have a new blade on hand, a flathead screwdriver, and a pair of pliers if you're replacing the blade on a Performance trimmer.

AD
How To Sharpen Your Trimmer Blade!
How To Sharpen Your Trimmer Blade!
Replacing Blade Runner on Fiskars Paper Trimmer
Replacing Blade Runner on Fiskars Paper Trimmer
Fiskars 152490-1004 Paper Trimmer, Replacing the blade
Fiskars 152490-1004 Paper Trimmer, Replacing the blade

For the Original trimmer, follow these steps:

Removing the Blade Guard

The blade guard, or the carriage, needs to be removed first. It's the moving part of the trimmer that houses the blade. To remove it, turn the trimmer upside down and locate the small screw at the bottom. Use your flathead screwdriver to loosen and remove the screw.

Fiskars Trimmer??? Is it worth it
Fiskars Trimmer??? Is it worth it
Fiskars Paper Trimmer
Fiskars Paper Trimmer

Once the screw is out, lift the carriage off the base. Be careful not to touch the blade.

Removing the Old Blade

With the guard off, you can now see the old blade. To remove it, locate the two small screws on either side of the blade. Unscrew them with your flathead screwdriver and lift the blade out of the base.

AD

Store the old blade safely, as it can still be sharp.

Replacing the Blade on a Fiskars Performance Paper Trimmer

The Performance trimmer has an additional safety feature, a blade release lever. Replacing the blade on this trimmer requires a bit more finesse.

Follow these steps:

AD

Removing the Blade Guard

Turn the trimmer upside down and locate the three screws on the bottom. Use your flathead screwdriver to loosen and remove them.

Once the screws are out, slide the guard off the base. You might need to use your pliers to gently pry it off.

Be careful not to touch the blade.

AD

Removing the Old Blade

Locate the blade release lever on the side of the trimmer. Push the lever down to release the blade.

The blade should pop out of the trimmer. If it's stuck, gently tap the lever with a hammer to help release it.

Remove the old blade from the trimmer.

Inserting the New Blade

Insert the new blade into the trimmer. Make sure the sharp edge faces the same direction as the old blade.

Push the blade into the trimmer until it clicks into place. The blade should be secure and not wobble.

Reassembling the Trimmer

Now, it's time to put your trimmer back together. For the Original trimmer, simply reverse the steps to remove the blade guard and screw it back onto the base.

For the Performance trimmer, slide the guard back onto the base and secure it with the three screws. Make sure the screws are tightened firmly but not too tight to avoid stripping them.

Now, your Fiskars paper trimmer is as good as new, ready to give you clean, precise cuts for a long time to come.

Regularly replacing your blade can extend the life of your paper trimmer. It's a small investment that pays off in the long run. Happy trimming!

AD