how to replace exterior door sweep

Replace Exterior Door Sweep: Step-by-Step Guide

By Nicole Anderson
AD

Tired of dealing with a worn-out exterior door sweep? Drafts, squeaks, and even pests finding their way in can signal it's time for a replacement. Not to worry, though! This comprehensive guide will walk you through the process of how to replace exterior door sweep, ensuring a solid, weather-tight fit.

Replacing an exterior door sweep might seem daunting, but with the right tools and a little elbow grease, it's a task any homeowner can tackle. By the end of this article, you'll be equipped with the knowledge to prep, replace, and maintain your new sweep, keeping drafts and vermin at bay.

Gather Your Tools and Materials

Before you dive into the project, ensure you have the necessary tools and materials for a smooth process. You'll need:

AD
How To Weatherstrip Your Exterior Door: Keep The Cold Out
How To Weatherstrip Your Exterior Door: Keep The Cold Out
How to Replace Exterior Door Threshold
How to Replace Exterior Door Threshold
Replace an outside door sweep or bottom door seal
Replace an outside door sweep or bottom door seal
  • A tape measure
  • A hacksaw or circular saw
  • A flathead screwdriver
  • A claw hammer
  • A utility knife
  • A drill (if your new sweep requires screws)
  • A new exterior door sweep (ensure it matches your door's size and style)

Measure Your Door

Accurate measurement is crucial for a perfect fit. Here's how to measure for your new exterior door sweep:

  1. Close your door and check that it shuts properly without any major gaps.
  2. Measure the width of your door at the threshold.
  3. Measure the height of the door from the threshold to the bottom of the doorknob or lock.

The new sweep's dimensions should mirror these measurements.

How to replace a door seal
How to replace a door seal
an open door on the floor in front of a white wall and tile flooring
an open door on the floor in front of a white wall and tile flooring

Remove the Old Door Sweep

Before you can install the new one, the old exterior door sweep needs to go. Here's how to remove it:

  1. Open your door completely to expose the sweep.
  2. Using a flathead screwdriver, pry off any finishing material, such as trim or molding, that surrounds the sweep.
  3. If your old sweep is held in place by screws, use a drill to remove them. If it's held by nails, use a claw hammer to pull them out.
  4. If the old sweep is stubborn, use a utility knife to cut it into manageable sections before removing it.

Prep the Door and Install the New Sweep

Now that the old sweep is gone, it's time to prep the door and install the new one.

AD

Clean the Door

Before installation, clean the bottom of the door using a mild detergent and water. This helps create a smooth, even surface for the new sweep to adhere to.

Install the New Exterior Door Sweep

With the door clean and dry, it's time to install the new exterior door sweep. The process varies slightly depending on whether you have a replacement sweep or are installing a new one:

  • Replacing a sweep: With the new sweep's size confirmed, simply position it against the door and use the hardware that came with it (usually screws or nails) to affix it in place. Test the door's operation to ensure it closes properly.
  • Installing a new sweep: If your new sweep doesn't come with hardware, you may need to use screws or nails to attach it to the door. Make sure to use appropriated-long fasteners that won't poke through the other side of the door.

Once installed, reattach any finishing material you removed at the beginning of the process.

AD

Ensure a Proper Seal

A well-installed exterior door sweep should provide a tight seal against the threshold. To check your work, close the door and examine the contact between the sweep and the threshold. If there are any gaps, consider adding weatherstripping to improve the seal.

Use Weatherstripping to Seal Gaps

If your door doesn't seal perfectly against the threshold, applying weatherstripping can help. Here's how:

  1. Choose weatherstripping that matches your door's material and dimensions.
  2. Measure and cut the weatherstripping to match the width and height of your door.
  3. Use an adhesive suitable for your door's material to attach the weatherstripping, following the package instructions.
  4. Test the door's operation to ensure it still moves freely and maintains a proper seal.

Congratulations! You've successfully replaced your exterior door sweep and sealed it against drafts and pests. Regularly check your door sweep and weatherstripping to maintain a tight seal and keep your home energy-efficient and secure.

AD

Don't forget, a well-maintained exterior door is a welcoming one. Consider using this DIY project as an opportunity to upgrade your door's appearance with a fresh coat of paint or new hardware. Happy home improvement!

AD