how to replace can light fixture

How to Replace a Can Light Fixture: A Step-by-Step Guide

By Laura Smith
AD

Swapping out an old can light fixture for a new one is a DIY task that's both straightforward and rewarding. It's an easy way to update the look of a room, improve lighting, and even save on energy costs. Let's guide you through the process with simple steps and expert tips.

Before we begin, ensure you're comfortable working with electrical components and have the right tools. Here's what you'll need: a removable can light fixture, a screwdriver (Philips or flathead, depending on your fixture), wire strippers, a voltage tester, and optionally, a new canopy and/or wires.

Preparation: Safety First

Before you touch any wires, always shut off power to the fixture at the circuit breaker. Use a voltage tester to confirm wires are dead. Safety glasses and gloves are also recommended.

AD
How to Change a Wall or Ceiling Light Fixture
How to Change a Wall or Ceiling Light Fixture
How To Replace An Outdated Can Ceiling Light Without Rewiring - Fortune House Shop
How To Replace An Outdated Can Ceiling Light Without Rewiring - Fortune House Shop
Update Recessed Can Lights with Energy Efficient LED Lights
Update Recessed Can Lights with Energy Efficient LED Lights

Check that your new fixture is the correct size and type for your existing can. The most common size is 4" or 6", but others exist. Ensure it fits in your ceiling and is compatible with your current wiring.

Removing the Old Fixture

Using your screwdriver, loosen and remove the screws securing the old fixture to the mounting box (can). Gently pull the fixture down. If it's stuck, try twisting it slightly.

How To Install A Light Fixture (Easy Diy Step-By-Step Guide)
How To Install A Light Fixture (Easy Diy Step-By-Step Guide)
Add Energy Efficient LED Fixtures in Recessed Can Lights
Add Energy Efficient LED Fixtures in Recessed Can Lights

Once removed, inspect the mounting box. It should have mounting screws or clips. If these are missing or damaged, you might need to replace the entire box.

Removing the Wiring Harness

Carefully unclip or unscrew the old wiring harness, which connects the fixture to the electrical box. Gently pull it out.

AD

If the wires are connected directly to the box instead of a harness, you'll need to cut them. Try not to nick the wires' insulation, and leave enough wire to connect to your new fixture.

Preparing the New Fixture

Before installing, check that your new fixture comes with a mounting bracket. If it doesn't, you'll need to buy one. Some fixtures include a canopy, which covers the box and provides a finished look.

If needed, attach the mounting bracket to the new fixture, following the manufacturer's instructions. If the new fixture is a different size than the old one, you may need to trim or extend the wires slightly.

AD

Installing the New Fixture

Feed the new fixture's wires up through the electrical box. Ensure the canopy sits flush with the ceiling if applicable.

Connect the new fixture's wires to the electrical box. The black (hot) wire connects to the black, the white (neutral) to the white, and the ground to the ground wire or box. Use wire nuts to secure connections, wrapping them clockwise for a tight fit.

Securing the Fixture

Insert and secure the new fixture into the mounting box. Tighten screws until the fixture is secure but be careful not to overtighten and strip them.

AD

Ensure the fixture is level and centered, then plug it in at the circuit breaker. Turn on the power and test the new fixture.

Congratulations! You've successfully replaced your old can light fixture. This update not only improves the look of your room but also ensures your lighting is safe, efficient, and up-to-date.

AD