how to replace broken toilet flange

"How to Fix a Broken Toilet Flange"

By James Hernandez
AD

Does your toilet wobble when you sit on it? Is your floor painted in watercolors due to a leaky toilet? It's possible that your toilet flange, the part that connects your sewer drain and your toilet, is broken. Replacing a broken toilet flange isn't a DIY job for the faint-hearted, but with the right tools and a patient approach, it's definitely achievable. Let's guide you through the process.

Before we start, it's crucial to note that this task can be messy and may require basic plumbing skills. If you're unsure about any step, it's always best to call a professional plumber. Now, let's dive into how to replace that broken toilet flange.

Gather Your Tools and Materials

First things first, you'll need the right tools and materials to get the job done. Here's what you'll need:

AD
there is a hole in the floor with a spatula next to it
there is a hole in the floor with a spatula next to it
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
Toilet Repair Ring Flange: Fix Leaks, Reset Your Toilet, and Stop a Running Toilet
Easily fix your broken toilet flange!
Easily fix your broken toilet flange!
  • New toilet flange
  • Wax ring
  • Adjustable wrench
  • Hacksaw
  • Gloves
  • Towel
  • Screwdriver (depending on your toilet model)
  • Plumber's putty
  • Bucket and old clothes (trust us on this one)

Preparation: Disconnecting the Toilet

Before you can start replacing the flange, you need to disconnect your toilet from the sewer pipe. Here's how:

1. First, turn off the water supply to your toilet. The valve is usually behind the toilet.

How to Remove Glued Toilet Flange
How to Remove Glued Toilet Flange
How to Replace Flange on Toilet
How to Replace Flange on Toilet

2. Flush the toilet to empty the tank, then use a towel to soak up any remaining water.

3. Disconnect the water supply line from the bottom of the tank. This might require a wrench to loosen the nut.

AD

Removing the Old Flange

Now that your toilet is disconnected, it's time to remove the old flange. Here's how to do it:

1. Using an adjustable wrench, loosen and remove the nuts and bolts that secure the toilet to the floor.

2. Carefully lift the toilet off the flange. If it's stuck, you might need to rock it gently back and forth.

AD

3. Once the toilet is off, you should see the old flange. If it's broken or cracked, remove it using a hacksaw or pliers. If it's not broken, you can leave it in place.

Installing the New Flange

Now that the old flange is out, it's time to install the new one. Here are the steps:

Positioning the New Flange

If you removed the old flange, you'll need to position the new one. Here's how:

AD

1. Push the new flange through the hole in the floor until the bottom lip reaches the floor.

2. Use the bolts that came with the new flange to secure it to the floor. Don't tighten them all the way yet.

Sealing the Flange

Before you can set the toilet back in place, you need to seal the new flange. Here's how:

1. Apply a small amount of plumber's putty around the bottom of the new flange.

2. Press the wax ring onto the top of the flange. The putty will ensure a tight seal.

Reinstalling the Toilet

Now that your new flange is sealed, it's time to reinstall the toilet. Here are the steps:

Setting the Toilet in Place

1. Carefully lower the toilet onto the new wax ring and flange.

2. Rock the toilet gently to ensure a good seal.

Securing the Toilet

1. Using the nuts and bolts you removed earlier, secure the toilet to the floor.

2. Tighten the nuts by hand as much as you can, then use a wrench to snug them up.

And there you have it! You've successfully replaced your broken toilet flange. Now, turn the water supply back on, give your new seal a test flush, and breathe a sigh of relief knowing you've tackled a job many homeowners dread.

AD