how to replace brita filter

Step-by-Step: How to Replace Your Brita Filter

By John Harris
AD

Is your Brita pitcher not running as smoothly as it used to? It might be time to replace the filter. Don't worry, it's a straightforward process. Here's a step-by-step guide on how to replace your Brita filter, ensuring fresh, clean water in no time.

Before we begin, ensure you have a new Brita filter ready. The filter type depends on your pitcher - Brita Standard, Longlast, or the faucet mount filters. Always choose the one recommended for your specific model.

Preparation

Before installing a new filter, there are a few things you should do to ensure a smooth process.

AD
Instructions on Replacing a Brita Filter Instructions
Instructions on Replacing a Brita Filter Instructions
the words here's how often you should really replace your brita water filter real simple
the words here's how often you should really replace your brita water filter real simple
How to Choose the Right Brita Filter for 99% Lead Removal
How to Choose the Right Brita Filter for 99% Lead Removal

First, run a cycle of water through your pitcher with the old filter in place. This helps to flush out any remaining contaminants and prevents the new filter from becoming overwhelmed initially.

Understanding Your Filter

Knowing your filter type is crucial. Brita offers two main types: the Standard and the Longlast. The Standard filters need to be replaced every 40 gallons or about two months, while the Longlast filters can last up to six months.

Can You Recycle Brita Water Filters?
Can You Recycle Brita Water Filters?
Inside a Brita Water Filter - a filter autopsy
Inside a Brita Water Filter - a filter autopsy

For faucet mount filters, the process is slightly different, but the steps are equally simple. Hijack to the relevant section below if that's what you're using.

Gather Your Tools

You only need a few tools for this task:

AD
  • A new Brita filter
  • Your Brita pitcher
  • Water (to flush the pitcher)

Replacing the Brita Filter

Now that you're prepared, let's dive into the step-by-step process of replacing your Brita filter.

First, locate the filter housing on your pitcher. It's usually at the top, with a lever that allows you to remove the old filter.

Removing the Old Filter

Start by lifting the handle of the filter housing to release the old filter. Some older models may require you to unscrew the housing first. Twist the old filter counterclockwise to remove it.

AD

If you hear a clicking sound, don't worry. That's just the old filter's ozone generator fuse releasing. It's normal and indicates that the filter's activated carbon has been depleted.

Installing the New Filter

Check that the new filter is compatible with your pitcher. The model number should be enough to confirm this. If you're unsure, consult the user manual or contact Brita's customer support.

Hold the new filter by the center ridge and twist it clockwise into the filter housing. You should feel it click into place. For models with a noticeable 'stop', ensure you don't go past it to avoid damaging the filter.

AD

Activation and First Use

Activating your new Brita filter is as simple as running water through it. This step is crucial as it ensures the filter is ready to trap impurities.

First, discard the initial two filter lives (usually 20 gallons or four batches of water) to ensure any residual contaminants are flushed out. These lives are indicated on the sticker on top of the filter.

Flushing the Filter

Fill your Brita pitcher with water and place it on its reservoir. Run the water through the filter into a large container. Repeat this process at least twice to ensure a thorough flush.

Remember, during the first flush, the water might still look clear but may have a slight ' activated carbon' taste. This is normal and will disappear within a few gallons. Your water should now be ready to drink.

Avoiding Common Mistakes

Here are a few things to avoid when using Brita filters:

  • Never run hot water through the filter. Always use cold water to avoid damaging the filter.
  • Don't leave your Brita pitcher empty. Keeping it filled with water helps maintain the filter's performance.
  • Regularly replace your filter according to the recommended schedule. Using it beyond its lifespan can lead to sistema that affect the water's taste and quality.

Replacing your Brita filter is a straightforward process that ensures your water remains fresh and clean. Regularly maintaining your pitcher will not only enhance the water's taste but also extend the lifespan of your Brita. Happy filtering!

AD