how to replace bicycle handlebars

How to Replace Bicycle Handlebars: A Step-by-Step Guide

By Richard Jones
AD

Bicycle handlebars are arguably the most crucial point of contact between a cyclist and their bike. They dictate your riding position, comfort, and handling. Over time, or due to wear and tear, you might need to replace your bicycle handlebars. Fret not, as with a bit of know-how and the right tools, you can replace bicycle handlebars like a pro. Here's a comprehensive guide to help you through the process.

Before we dive into the steps, ensure you have the necessary tools at hand. You'll need a wrench (usually 15 mm), a screwdriver (allen key or flathead), a hacksaw, a hammer, and protective gloves. Also, have your new handlebars ready. They should be compatible with your bike's stem and steerer tube. Let's get started.

Preparation and Removal of Old Handlebars

First, prepare your bike for the handlebar replacement. Find a suitable workspace, preferably a garage or bike repair shop with adequate lighting and ventilation. Ensure your bike is in a stable position for easy access to the handlebars.

AD
How to Replace Handlebar Grips
How to Replace Handlebar Grips
Bicycle Repair & Maintenance Guides - Video Tutorials | BikeRide
Bicycle Repair & Maintenance Guides - Video Tutorials | BikeRide
How to Wrap Your Handlebars [Video]
How to Wrap Your Handlebars [Video]

Next, remove the old handlebars. Start by loosening the stem bolts using your wrench or screwdriver. You might need to use some force, but be careful not to damage the hardware. Once loosened, gently tap the handlebars or stem with a hammer to help loosen any rust or corrosion. With the bolts removed, carefully slide the old handlebars off the stem.

Measuring and Marking the Steerer Tube

Before installing the new handlebars, measure the length of the steerer tube that extends beyond the stem. Use this measurement to determine the correct position for your new handlebars, ensuring they fit snugly with the stem and don't stick out too far. This step is crucial for maintaining proper ride stability and comfort.

Easiest Way To Remove Bike Grips
Easiest Way To Remove Bike Grips
How to Wrap Handlebars for Road Bikes
How to Wrap Handlebars for Road Bikes

You might want to mark this position using a marker or a piece of tape to guide you when fitting the new handlebars. Some stems come with markings that indicate the center of the handlebars. If yours doesn't, make sure to align the center of your new handlebars with your mark.

Checking the Stem Clamp Diameter

Before installing the new handlebars, verify that the diameter of the stem clamp matches your bike's handlebar size. Most mountain bikes use a 25.4 mm stem clamp diameter, while road bikes often use a 31.8 mm clamp. Ensure your new handlebars are compatible with your stem to avoid any issues during installation.

AD

If you find that your stem and handlebars are not compatible, you might need to purchase a new stem or use a shim to accommodate the difference in sizes. Always double-check before making a purchase to avoid unnecessary expenditure.

Installing the New Bicycle Handlebars

Now that you've prepared your bike and ensured compatibility, it's time to install the new handlebars. First, slide the new handlebars onto the stem, aligning the center with your mark. Ensure the grip area of the handlebars faces the correct direction. Typically, the grips face forward when riding in a neutral position.

Next, slide the handlebars down the steerer tube until they sit snugly against the stem. Use the mark you made earlier as a guide. Tighten the stem bolts slowly but firmly. Make sure to use even force on both bolts to prevent warping the stem or steer tube. You can use a torque wrench if you have one to ensure you're tightening the bolts to the correct specification.

AD

Securing the Handlebar with a Coned Washers

Most stems come with cone washers that help secure the handlebars in place. Apply grease to the washers before sliding them onto the bolts. This grease will help prevent the bolts from seizing up over time. Tighten the bolts against the cone washers, making sure they're snug but not overly tight. Again, use a torque wrench if you have one.

Once the bolts are tightened, double-check that the handlebars are secure and don't wobble. Give them a gentle shake to ensure they're tightly fastened. If everything feels secure, you're ready to take your bike for a spin.

Finishing Touches and Final Adjustments

Before hopping on your bike, perform a final check to ensure everything is in order. Tighten any loose bolts, inflate your tires if necessary, and make sure your brakes are working correctly. You might also want to adjust your saddle height and position to accommodate the new handlebars.

AD

Finally, take your bike for a short test ride. Start slow and gradually build up speed as you get used to the new handlebars. Make any necessary adjustments based on your comfort and riding style. With a bit of fine-tuning, you'll be cruising in no time.

Replacing your bicycle handlebars can greatly improve your riding experience. Whether you're looking for a more comfortable position, better control, or a personalized touch, the process is straightforward and rewarding. Happy cycling!

AD