how to replace belt on kenmore dryer

How to Replace Belt on Kenmore Dryer: Step-by-Step Guide

By Mark Clark
AD

Is your Kenmore dryer showing signs of wear and tear? It might be time to replace the belt. Regular maintenance and replacement of essential components like the belt ensure the longevity and efficient functioning of your dryer. This comprehensive guide will walk you through the process of replacing the belt on your Kenmore dryer in a safe and effective manner.

Before you begin, ensure you have the necessary tools and replace the belt with an authentic Kenmore part to avoid future issues. Remember to unplug the dryer from the power source before starting any repair work.

Identifying the Problem

Before you decide to replace the belt, you should first confirm that it's indeed the cause of the issue. The dryer belt typically shows signs of excessive wear, such as fraying, cracking, or stretching. Other symptoms of a faulty belt include:

AD
How to Replace the Belt on a Kenmore 70 Series Dryer
How to Replace the Belt on a Kenmore 70 Series Dryer
How to Replace the Belt on a Kenmore 90 Series Dryer
How to Replace the Belt on a Kenmore 90 Series Dryer
How to install a Dryer belt. - Home Repair and Improvement Projects
How to install a Dryer belt. - Home Repair and Improvement Projects
  • Dryer not heating up
  • Clothes taking longer to dry
  • Strange noises coming from the dryer

Gathering Your Tools and Replacement Parts

To replace the belt on your Kenmore dryer, you'll need the following tools and materials:

  • A new dryer belt (ensure it's a genuine Kenmore part)
  • Screwdrivers (Philips and flathead, as needed)
  • sockets ( depending on your dryer model)
  • Pliers
  • Adjustable wrench

Safety First: Disconnect the Dryer

Always prioritize safety when working on appliances. Start by unplugging the dryer from the power source. If it's hardwired, turn off the corresponding circuit breaker. Additionally, ensure the dryer is cool to the touch before starting any work.

How to Replace the Dryer's Drive Belt? (Step by step instructions)
How to Replace the Dryer's Drive Belt? (Step by step instructions)
Dryer Belt Replacement – Duet/HE3 Dryer Repair #661570
Dryer Belt Replacement – Duet/HE3 Dryer Repair #661570

Replacing the Belt

Now that you've gathered your tools and ensured the dryer is safely disconnected, it's time to replace the belt. The process may vary slightly depending on your dryer model, but the following steps provide a general guide:

Accessing the Belt

Begin by removing the back panel of the dryer. Consult your dryer's manual for the correct screws to use. After removing the panel, you should see the dryer belt wrapped around the drive motor pulley and the idler pulley. Use a marker or take a picture to remember the exact route of the belt for reassembly.

AD

Removing the Old Belt

To remove the old belt, follow these steps:

  • Use a ratchet and the appropriate socket to loosen and remove the pulley nut.
  • Remove the pulley retaining sleeve using a flathead screwdriver or pliers.
  • Slide the old belt off the motor pulley, then the idler pulley.

If the idler pulley is stuck, you may need to use an adjustable wrench or pliers to carefully twist and loosen it.

Installing the New Belt

Position the new belt around the idler pulley first, then wrap it around the drive motor pulley. Make sure the belt is properly aligned with the grooves on both pulleys. Tighten the belt as needed by adjusting the idler pulley.

AD

realesemble the dryer by reversing the disassembly process. Ensure all screws are tightened properly, and the back panel is secured. Plug in the dryer or restore power to the circuit breaker. Run the dryer on a low heat setting for a few minutes to ensure the belt is functioning correctly.

Post-Installation Care

Regularly inspect and maintain your dryer to prevent premature belt wear. Clean the lint filter after each use, and periodically clean the dryer vent and duct to ensure proper airflow. Additionally, consider using the dryer's moisture sensing feature to prevent over-drying, which can put extra strain on the belt.

Professional Help

If you're unsure about any part of the process or encounter difficulty during the replacement, don't hesitate to seek professional assistance. A qualified technician can diagnose and repair the issue safely and efficiently.

AD

In the end, replacing the belt on your Kenmore dryer is a rewarding task that can help you save money and ensure the continued efficient functioning of your appliance. By following this comprehensive guide and prioritizing safety, you can confidently tackle this home maintenance project. Happy DIYing!

AD