how to replace battery in tile mate

Replace Tile Mate Battery: Step-by-Step Guide

By David Jackson
AD

Ever faced a drained Tile Mate, unable to locate your lost items? Replacing the battery is a quick, cost-effective solution. Here's a step-by-step guide on how to do it safely and efficiently, ensuring your Tile Mate stays Operational. Let's dive right in.

Before we proceed, remember that Tile Mate uses a CR2032 coin cell battery. These are inexpensive and easily replaceable. Make sure you have one ready before you begin. Also, ensure you're working in a well-lit area to avoid any mishaps during the process.

Gathering Necessary Tools and Materials

Before we get started, let's ensure you have everything you need for a smooth process.

AD
two cell phones sitting next to each other on top of a wooden table in front of a plant
two cell phones sitting next to each other on top of a wooden table in front of a plant
Tile Mate, Pro Get Replaceable Batteries, Premium Service Added - SlashGear
Tile Mate, Pro Get Replaceable Batteries, Premium Service Added - SlashGear
Tile’s new trackers feature a replaceable battery
Tile’s new trackers feature a replaceable battery

You'll need:

  • A new CR2032 battery
  • Something thin and flat - like a coin or a flathead screwdriver - to help pop open the Tile Mate's cover
  • A small, flat surface to work on
  • Patience and a steady hand

The Tile Mate's Construction

First, familiarize yourself with the Tile Mate's construction. It's a small, flat, circular device with a button on one side. The battery is located under the circular disc on the other side.

New Tile Mate and Pro now come with replaceable batteries, longer range
New Tile Mate and Pro now come with replaceable batteries, longer range
iFixit Shares AirTag Teardown Revealing 'Impressively Compact' Design Compared to Tile Mate and Galaxy SmartTag
iFixit Shares AirTag Teardown Revealing 'Impressively Compact' Design Compared to Tile Mate and Galaxy SmartTag

Understanding this will help you distinguish between the top and bottom of your Tile Mate, making the process easier.

Preparing the Tile Mate for Battery Replacement

Now, let's get your Tile Mate ready for the battery swap.

AD

Start by separating your Tile Mate from any other items it's attached to. This is to prevent any damage during the battery replacement process.

Replacing the Battery

Now that you're ready, let's get into the main event - replacing the battery.

Be gentle throughout the process. The Tile Mate is small and delicate, so a steady hand is key.

AD

Opening the Tile Mate

Using your thin, flat tool, carefully insert it between the edge of the disc covering the battery and the main body of the Tile Mate.

Twig the tool gently to pry open the disc. It might take a bit of patience and careful maneuvering, but it should eventually pop open, revealing the battery compartment.

Removing the Old Battery

Once you've opened the Tile Mate, you'll see the old battery, marked with a '+' and a '-'.

AD

Carefully use your tool to lift the battery out of its compartment. Be sure not to touch the terminal ends - they're delicate and touching them with your fingers could damage them.

Inserting the New Battery

With the old battery out, it's time to insert the new one.

Align the new battery with the compartment, ensuring the '+' end faces up. Then, gently press it into place. There should be some resistance, but it should fit snugly.

Closing Up

Now that the new battery is in place, it's time to close up your Tile Mate.

Simply align the disc with the battery compartment and gently press it back into place. You should hear a click when it's locked back in.

Testing the New Battery

Alright, you've finally replaced the battery! It's time to test your Tile Mate to ensure everything is working correctly.

Press and hold the button for a few seconds. Your Tile Mate should emit a tune, indicating it's working properly.

Syncing Your Tile Mate

If the test was successful, it's time to sync your Tile Mate with your Tile app.

Open the app, navigate to the settings, and follow the prompts to sync your Tile Mate with the new battery.

That's it! You've successfully replaced the battery in your Tile Mate. Keep this guide handy for whenever you need a quick refresh. Happy hunting!

AD