"How to Replace Battery in Subaru Crosstrek Key Fob"
Ever found yourself locked out of your Subaru Crosstrek because of a dead key fob battery? Don't worry, replacing it is a straightforward task that you can do at home. This guide will walk you through the process step by step, ensuring you get back on the road in no time.
Before we dive in, let's quickly cover the tools you'll need. Apart from a new CR2025 battery, which is the standard for Subaru key fobs, you'll also need a plastic pry tool, a small flathead screwdriver, and ideally, a magnetized pick-up tool for the battery. Now, let's get started.
Gathering Your Materials and Prepping Your Workspace
First, ensure you have all the necessary tools and materials within reach. A well-lit, spacious workspace, like a kitchen counter or a garage workstation, is ideal for this task.
Before you proceed, make sure your new battery is a CR2025. This type of battery is a 3V coin cell type, widely used in keyless entry devices, remote controls, and certain calculators.
Gently Opening the Key Fob Case
The first step is to carefully open the key fob case to access the battery compartment. Start by inserting the plastic pry tool into the seam where the two halves of the case meet. Gently twist and lift to separate the case, taking care not to damage the plastic.
If you encounter any resistance, try using a small flathead screwdriver to gently pry the case open. It might take a bit of patience, but you should be able to separate the two halves without braking them.
Locating and Removing the Battery
Once you've opened the case, you should see the circuit board with the battery held in place with a small clip or a piece of tape. Use your flathead screwdriver or the edge of the pry tool to carefully unclip or remove the tape, ensuring you don't damage the battery or the circuit board.
Now, use your magnetized pick-up tool, if you have one, to extract the old battery. If not, you can carefully use your fingers or a tweezers. Be cautious not to bend or damage the battery contacts on the circuit board.
Installing the New Battery
Before inserting the new battery, ensure the positive (+) and negative (-) sides are aligned correctly. The positive side usually has a + sign or a bump, while the negative side is flat.
Position the new battery with the positive side facing up and the flat side facing down. Gently place it onto the contact points, ensuring it's securely in place. Some key fobs might require the battery to be inserted in a specific direction, so if it's not fitting, double-check the positioning.
Reassembling the Key Fob
Now that the new battery is in place, it's time to put the key fob back together. First, make sure there are no loose pieces of plastic or debris in the way. Then, carefully align the two halves of the case and apply gentle pressure to snap them back together.
Some key fobs might have an extra clip or a screw that needs to be replaced before closing the case. If yours does, make sure to reattach it securely using a small screwdriver or pliers.
Testing the Replacement Battery
With the key fob reassembled, the final step is to test the new battery. Press the lock and unlock buttons to ensure your key fob is working correctly. If everything functions as expected, you've successfully replaced the battery in your Subaru Crosstrek key fob.
If the key fob doesn't respond, double-check that the battery is inserted correctly. If the issue persists, it might be a good idea to reach out to a professional or Subaru's customer support for further assistance.
And there you have it! You've just replaced the battery in your Subaru Crosstrek key fob, saving yourself time, money, and the hassle of visiting a dealership or a repair shop. Happy driving!