how to replace battery in honda pilot key fob

Honda Pilot Key Fob Battery Replacement: Step-by-Step Guide

By Sarah Wilson
AD

Ever found yourself in a pickle, locks engaged but your Honda Pilot key fob has run out of juice? Don't let a low battery leave you stuck! Replacing it is a breeze, and today we're guiding you through the process, step-by-step.

While many might suggest visiting a professional, replacing your Honda Pilot key fob battery at home is a straightforward DIY task that can save you time and money. So, grab your tools and let's dive in!

What You'll Need

Before you start, make sure you have the following tools and supplies on hand:

AD
How to Replace Honda Key Fob Battery and Reassemble If It Falls Apart
How to Replace Honda Key Fob Battery and Reassemble If It Falls Apart
How to Change Battery in Honda Pilot Key Fob: A Step-by-Step Guide
How to Change Battery in Honda Pilot Key Fob: A Step-by-Step Guide
How to ● Honda Key Fob Remote Keyless Battery Change/Replace
How to ● Honda Key Fob Remote Keyless Battery Change/Replace
  • A small flathead screwdriver
  • A new CR2032 battery (3V, 2032 watch-shaped battery)
  • A coin or small, rounded object to help push the new battery into place

Location of the Battery Compartment

First, locate the small hole on the side of your key fob. This is where you'll insert the flathead screwdriver to access the battery compartment.

Honda strategically placed the battery compartment to ensure that it's not too easily accessible, adding an extra layer of security. Don't worry though, it's designed to be user-friendly when you know where to look.

DIY HONDA SMART Key FOB Battery Replacement Civic, Accord, CRV, Pilot, Odyssey, Ridgeline
DIY HONDA SMART Key FOB Battery Replacement Civic, Accord, CRV, Pilot, Odyssey, Ridgeline
How to Replace Honda Key Fob Battery on Accord Civic CRV Pilot Ridgeline - CR1616 Change 2006
How to Replace Honda Key Fob Battery on Accord Civic CRV Pilot Ridgeline - CR1616 Change 2006

Replacing the Battery

Now that you have your tools and you've located the battery compartment, it's time to replace the battery. Follow these simple steps:

Remove the Old Battery

Use the flathead screwdriver to gently pry open the hole on the side of the key fob. The case will pop open slightly. Insert the screwdriver further to release the catches and fully open the case. You might need to wiggle it a bit.

AD

The old battery will be visible, and you'll notice that it's held in place with a small clip. Carefully remove the battery, ensuring not to bend the clip. Set the old battery aside and get ready to insert the new one.

Insert the New Battery

Before inserting the new battery, ensure it's positioned correctly. The positive side (+) should face up, towards the locking and unlocking buttons. If it doesn't fit, simply flip it over.

Using the coin or small rounded object, gently press the new battery into place. You should hear a slight click once it's seated properly. The spring clip should snap back into place, holding the battery securely.

AD

Test Your Key Fob

Reassemble your key fob by pushing the two halves back together. The catches should snap back into place, securing the case.

Now, test your key fob by locking and unlocking your doors. If everything works as expected, you've successfully replaced your Honda Pilot key fob battery! If not, double-check that the new battery is seated correctly and that there are no obstructions in the key fob.

While it's always a good idea to keep an extra key fob battery handy, regular use will drain the battery. It's recommended to replace it annually for optimal performance. Happy locking and unlocking!

AD
AD