how to replace battery apple tv remote

Apple TV Remote Battery Replacement: Step-by-Step Guide

By Brian Hernandez
AD

Has your Apple TV Remote stopped working reliably? It might be time to replace the battery. Here's a comprehensive guide on how to do this, ensuring your remote gets back to its usual smooth performance.

The process of replacing the battery in your Apple TV Remote is straightforward and shouldn't take more than a few minutes. Plus, it's much cheaper than buying a new remote. Let's dive right in.

Identifying Your Remote Type

Your procedure can vary slightly depending on whether you have an aluminum or white remote. Here's how to start:

AD
How To Replace Battery In Your Apple TV Remote
How To Replace Battery In Your Apple TV Remote
Apple TV Remote Battery Replacement in 2025 (All Models)
Apple TV Remote Battery Replacement in 2025 (All Models)
Lost Your Apple TV Remote? How to Replace It
Lost Your Apple TV Remote? How to Replace It

First, locate the model number on the back of your remote. If it's aluminum and has a glossy, metallic finish, you have the older generation. If it's white with a matte finish, you have the new Siri Remote that comes with the Apple TV 4K and Apple TV HD.

Gathering Necessary Tools

For both types of remotes, you'll need:

My Apple TV Remote Stopped Working—Here’s Exactly What I Did to Fix It
My Apple TV Remote Stopped Working—Here’s Exactly What I Did to Fix It
How To Replace The Battery In Your Apple TV Remote - SlashGear
How To Replace The Battery In Your Apple TV Remote - SlashGear

1. A #00 Phillips screwdriver

2. A new CR2032 coin cell battery (You can find these at most electronic stores or online)

AD

Removing the Back Cover

Once you've gathered your tools, it's time to open your remote:

1. Using your Phillips screwdriver, carefully unscrew the three small screws that hold the back cover in place. These screws are tiny, so be sure to keep them in a safe place.

2. After all screws are removed, gently open the remote. You might need to carefully pry it open with your fingernails or a small flathead screwdriver.

AD

Replacing the Battery

With the back cover removed, you can access the battery:

1. Use a small coin or your fingernail to gently lift the battery out of its compartment. It should pop right out.

2. Make sure the positive side (+) of the new CR2032 battery faces up.

AD

3. Place the new battery in the compartment, aligning the positive side (+) with the remote's contacts.

Assembling Your Remote

Now, securely reassemble your remote:

1. Place the back cover back onto the remote.

2. Replace and firmly tighten the three screws. But be careful, screw too tightly or you might strip the threads.

3. Test your remote by controlling your Apple TV.

And there you have it! Your Apple TV Remote is as good as new. Should you encounter any issues, remember, Apple offers excellent customer service.

Still enjoying your Apple TV? Consider investing in a protective case to keep your device safe and clutter-free. Until next time, happy streaming!

AD