how to replace batteries in swiffer wet jet

How to Replace Batteries in Swiffer Wet Jet

By Richard Miller
AD

Does your Swiffer WetJet seem to have lost its oomph? It might be time to replace its batteries. Worry not, as it's a straightforward process that doesn't require any special tools. In this guide, we'll walk you through the simple steps to replace batteries in your Swiffer WetJet, ensuring it's ready to tackle those tough messes again.

Before we dive into the process, let's ensure you have the necessary tools. You'll need the following: a new set of alkaline batteries (four AA or AAA, depending on your WetJet model), and a Phillips #2 screwdriver. Once you've gathered these, you're all set to proceed.

Identifying Your WetJet's Battery Compartment

The first step is to locate the battery compartment on your Swiffer WetJet. On most models, it's situated on the handle, near the trigger. There should be a small cover secured by a Phillips-head screw.

AD
Changing the Batteries on a Swiffer Wet Jet
Changing the Batteries on a Swiffer Wet Jet
Replacing Swiffer Vacuum Battery
Replacing Swiffer Vacuum Battery
Replacing the SwifferVac Battery
Replacing the SwifferVac Battery

For a quick reference, check your Swiffer WetJet's user manual or look for a small symbol that usually resembles a battery, indicating the compartment's location.

Preparing to Remove the Battery Cover

Before you remove the battery cover, make sure your WetJet is turned off and not currently in use. This ensures your safety and prevents any accidental triggering while you're working.

How to Assemble a Swiffer WetJet: Step-By-Step Guide
How to Assemble a Swiffer WetJet: Step-By-Step Guide
SWIFFER BATTERY REPLACEMENT by FRANK BUTLER, VIRGINIA BEACH, VA
SWIFFER BATTERY REPLACEMENT by FRANK BUTLER, VIRGINIA BEACH, VA

Next, gather your Phillips #2 screwdriver. This is the standard size for removing the battery compartment cover.

Removing the Battery Cover

With your screwdriver, carefully turn the screw counterclockwise. It's usually gently secured, so you shouldn't need to apply much force. Once loose, you should be able to remove the screw by hand.

AD

After removing the screw, gently lift the battery cover to reveal the battery compartment. Set the cover and screw aside in a safe place, as you'll need them later to reassemble your WetJet.

Removing and Identifying the Old Batteries

Now that you've accessed the battery compartment, you'll see the four AA or AAA batteries (depending on your model) powering your Swiffer WetJet. They should be clearly labeled with a positive (+) and negative (-) sign to help you identify their polarity.

займай To remove the batteries, carefully grasp each one at their edges to avoid touching the terminals. Pull them gently but firmly to release them from their contacts. If a battery is stuck due to corrosion or age, you may need to use a little more force, but be careful not to damage the compartment or the battery itself.

AD

Putting in the New Batteries

Before installing the new batteries, make sure they match the size and polarity of the old ones. Always ensure the positive (+) end is aligned with the positive terminal in the compartment, and the negative (-) end with the negative terminal.

Start by placing the two batteries with the same polarity (either both positive or both negative) in their respective slots. Then, insert the remaining two batteries of the opposite polarity. Make sure they're securely in place but not forced in.

Replacing the Battery Cover

With the new batteries securely in place, it's time to reassemble your Swiffer WetJet. Carefully replace the battery cover, ensuring it's properly aligned with the compartment.

AD

Using your Phillips #2 screwdriver, replace the screw and turn it clockwise until it's securely tightened. Be cautious not to overtighten, as this could strip the screw and damage the handle.

Now that you've successfully replaced the batteries in your Swiffer WetJet, it's ready to clean up those stubborn messes again! Always remember to replace your WetJet's batteries every four to six months or when you notice a decline in its performance. Happy cleaning, and remember, a well-maintained WetJet is a productive tool!

AD