how to replace bathtub drain lever

Step-by-Step Guide: Replace Bathtub Drain Lever

By Thomas White
AD

Is your bathtub's drain lever causing you grief? Perhaps it's sticky, broken, or just plain wrong for your bathroom aesthetics. Don't worry, replacing it is a straightforward DIY project that won't drain your wallet. Let's dive into the essential steps to replace your bathtub drain lever while keeping your project organized and up to code.

Before we start, remember that safety is paramount. Always turn off the water supply to your bathtub and be aware of the potential hazards involved. Now, let's tackle this task with confidence and precision.

Aucun Tools and Materials Needed

Before you get started, it's crucial to gather all the necessary tools and materials. This will ensure a smooth process and prevent unnecessary trips to the hardware store.

AD
a person holding a wrench in their right hand and pointing to the lever on an old overflow plate
a person holding a wrench in their right hand and pointing to the lever on an old overflow plate
a sink drain with the words how to replace your bathtub drain on it's side
a sink drain with the words how to replace your bathtub drain on it's side
How to Fix a Bathtub Drain Lever That Won’t Stay Down (February 2026 Guide)
How to Fix a Bathtub Drain Lever That Won’t Stay Down (February 2026 Guide)

Here's a list of tools and materials you might need:

  • New bathtub drain lever (ensure it's compatible with your tub and drain type)
  • Screwdriver (usually a flathead, but check your old lever)
  • Adjustable wrench
  • Channel-lock pliers (optional, for a better grip)
  • Rubber gloves (for a better grip and protection)
  • Petroleum jelly or silicone lubricant (to make removal easier)
  • Tape measure
  • Pencil
  • Optional: New drain assembly or plumber's putty (if needed)

Identify and Understand Your Drain Type

Before you dive in, it's essential to understand your bathtub drain type. This will help you choose the correct replacement lever and guide your installation process. The two most common types are:

How to Convert Bathtub Drain Lever to a Lift-and-Turn Drain
How to Convert Bathtub Drain Lever to a Lift-and-Turn Drain
How to Replace a Bathtub Drain Stopper With a Lift-and-Turn Drain
How to Replace a Bathtub Drain Stopper With a Lift-and-Turn Drain
  1. Push-pull lever: The lever slides up to open the drain and down to close it.
  2. Lever-handle type: The lever swings left or right to open and close the drain.

The steps to replace either type are similar, but the disassembly and assembly processes may vary slightly. Ensure your new lever matches your drain type for a proper fit.

Inspect for Plumbing Issues

Before you start, take a moment to inspect your tub's drainage system. Look for signs of leaks, corrosion, or other plumbing issues. Addressing these problems before you replace the lever can save you from future frustrations.

AD

Check the overflow plate and drain assembly for any damage. If you find issues, you may need to replace these parts as well. This is a great time to upgrade your drain assembly if desired, for improved drainage and a fresh look.

Now that you've gathered your tools, identified your drain type, and inspected your plumbing, it's time to replace that pesky lever. Follow these detailed steps for a successful upgrade:

Disassemble the Existing Lever

Begin by turning off the water supply to your bathtub. This is crucial to prevent leaks and water damage while working. Locate and turn the shutoff valve clockwise until it stops. If your tub doesn't have a dedicated shutoff valve, you may need to turn off the main water supply.

Next, remove the bathtub drain cover and the existing lever. Here's how:

AD
  1. Using a screwdriver, loosen and remove the set screw that holds the lever in place. This screw is usually located on the underside of the lever.
  2. If the lever is stuck, apply petroleum jelly or silicone lubricant to the lever and the pivot point. Allow it to sit for a few minutes before trying again.
  3. Grip the lever tightly with channel-lock pliers or adjustable wrench, if needed. Pull the lever straight out to remove it from the pivot. You may need to apply force, but be careful not to damage the lever or the pivot.

If your lever is damaged or particularly difficult to remove, you might need to call a professional plumber for assistance.

Prepare and Install the New Lever

With the old lever removed, it's time to install the new one. Before you begin, clean any debris or excess lubricant from the pivot point to ensure a smooth installation.

Next, fit the new lever onto the pivot. If the new lever doesn't fit perfectly, you may need to adjust it using a file or by bending it gently. Be careful not to damage the lever or the pivot during this process.

AD

Once the new lever is seated correctly, secure it with the provided set screw. Tighten the screw evenly, using just the right amount of force. Avoid overtightening, as this can strip the threads or damage the lever.

If your new lever didn't come with a set screw, you can reuse the old one. Ensure it's in good condition before reinstalling it.

Test the New Lever

With the new lever installed, turn the water supply back on and test the drain. The lever should open and close the drain smoothly and without leaks. If there are any issues, double-check your installation and ensure the new lever is compatible with your drain type.

If the lever isn't functioning as expected, you may need to add plumber's putty or replace the drain assembly. Consult the manufacturer's instructions for your specific drain and lever, and don't hesitate to seek professional help if needed.

Cleanup and Future Maintenance

With the new lever tested and working correctly, it's time to clean up your work area and ensure everything is in good working order.

Remove any tools, leftover parts, or lubricant from the bathtub area. Wipe down the tub and drain to remove any dirt or debris, and restore your bathroom to its pre-project condition.

Regular Maintenance

While replacing your bathtub drain lever is a straightforward task, regular maintenance can help prevent future issues and extend the life of your new lever.

Keep the drain clean by removing hair, soap scum, and other debris regularly. You can use a drain snake, a bent wire hanger, or commercial drain cleaners to clear any blockages. Additionally, consider installing a drain screen or drain guard to prevent debris from entering the drain in the first place.

Perform routine inspections of your bathtub's plumbing system. Look for leaks, signs of damage, or other issues that could lead to bigger problems down the line. Addressing these issues promptly can save you time, money, and unnecessary stress.

By following these guidelines, you can replace your bathtub drain lever with confidence and ensure many years of smooth, reliable performance. Happy DIY-ing!

AD