Replace Audio Technica Stylus: Step-by-Step
Has your beloved Audio-Technica turntable started producing disappointing sound quality? It might be time to replace your stylus, or cartridge as some would call it. Don't worry, this is a common issue and it's easily fixable. Let's delve into a step-by-step guide on how to replace your Audio-Technica stylus.
The life of a stylus is approximately 1000 hours of playtime. Over time, the diamond tip wears out, leading to degraded sound quality. So, if you're noticing a decrease in audio quality or squeaky, squawky, or downright silent playback, it's likely time for a replacement. Let's get started!
Understanding Your Audio-Technica Stylus
Before we dive into the nitty-gritty of replacing your stylus, let's understand the types of Audio-Technica cartridges. Audio-Technica offers both moving magnet (MM) and moving coil (MC) cartridges. The majority of Audio-Technica turntables come with MM cartridges, which are easy to replace and compatible with a wide range of phono preamps.
For the purpose of this guide, we'll focus on replacing an MM cartridge, as it's the most common type. However, if you're an audiophile with an MC cartridge, the process is similar, but you'll need a step-up transformer for compatibility with your phono preamp.
Identifying Your Cartridge
To ensure you purchase the correct replacement, you'll need to identify your current cartridge. The model number can usually be found on the cartridge itself or in your turntable's user manual.
For example, the popular AT95E cartridge used in many Audio-Technica turntables is a moving magnet cartridge. Knowing this will help you choose the right replacement cartridge.
Choosing a Replacement Cartridge
When selecting a replacement cartridge, consider factors like sound quality, durability, and compatibility. You can opt for the same model or upgrade to a higher quality cartridge for improved sound quality.
For instance, if you're upgrading from the AT95E, you might consider the AT33a or AT440ML, which offer superior sound quality and durability.
Replacing Your Audio-Technica Stylus
Now that you've sourced a compatible replacement cartridge, it's time to replace your stylus. Don't worry; this process is straightforward and doesn't require any specialized tools. Here's a step-by-step guide:
Preparation
First, gather your tools: a stylus force gauge (optional but recommended), a cartridge alignment protractor, and a screwdriver (usually Phillips). Also, ensure your turntable is unplugged to prevent any electrical mishaps.
Next, gently lift the tonearm and secure it in the rest position. Then, remove the dust cover and platters to access the cartridgeANOVA. If your turntable has an automated lift mechanism, ensure it's disengaged.
Removing the Old Cartridge
Using the appropriate screwdriver, carefully unscrew the cartridge from the cartridge holder. Most Audio-Technica cartridges use two screws. Don't force the screws; gentle pressure is all that's needed.
Once the screws are loose, gently pull out the cartridge. You might need to jiggle it slightly to release the tensions from the pins. If you're replacing the cartridge with a new one, make sure to keep track of the cartridge's polarity. The silver pin is positive, and the black pin is negative.
Installing the New Stylus
Before installing the new cartridge, double-check that the polarity is correctly aligned with the pins. The silver pin goes into the silver hole and the black pin into the black hole. Carefully align the cartridge with the headshell grooves and secure it with the screws.
Now, it's time to set the stylus' downforce and alignment. Use your stylus force gauge to set the downforce to the manufacturer's recommended weight, usually between 1.5 to 2.5 grams for Audio-Technica cartridges. Then, use the cartridge alignment protractor to ensure the stylus is perfectly perpendicular to the record grooves. Follow the manufacturer's instructions for this step.
Calibrating and Setting Up
With the new cartridge installed and aligned, it's time to fine-tune the tonearm and phono stage settings. Use a test record or a test tone to set your turntable to the correct playback level and adjust the tonearm's anti-skate and tracking force settings.
Calibrating the Tonearm
First, adjust the anti-skate setting to match the stylus' tracking force. The anti-skate compensates for the lateral force that pushes the stylus outwards. Most Audio-Technica turntables use a calibrated scale, making this process easy.
Then, adjust the tracking force to the manufacturer's recommended weight. This ensures optimal performance and prevents stylus damage.
Setting Up the Phono Stage
Finally, set your phono preamp's input to match your new cartridge's output. Moving magnet cartridges typically have an output of around 2.5mV to 8mV, so set your phono stage's input selector accordingly.
Congratulations! You've successfully replaced your Audio-Technica stylus and optimized your turntable's performance. Enjoy the enhanced sound quality and reassuring knowledge that you've done it yourself. Now, grab your favorite vinyl record and let the music play!