how to replace an iphone 6s battery

DIY: Step-by-Step Guide to Replace iPhone 6s Battery

By Andrew Lee
AD

Is your iPhone 6s struggling with battery life? It might be time to replace its battery. Apple has admitted to slowing down older iPhones with weak batteries, and yours could be one of them. Don't worry, though—replacing an iPhone 6s battery is a DIY project you can tackle with the right guides and tools. Let's dive into how to replace an iPhone 6s battery step by step.

Before we start, it's crucial to understand that while this process can save you money, it's not without risks. Replacing an iPhone battery at home voids your warranty, and if something goes wrong, you might end up with a broken phone. If you're not comfortable taking this risk, we recommend taking your iPhone to a professional service.

Preparation: Gather Tools and Understand Risks

The first step in replacing your iPhone 6s battery is to gather the necessary tools and understand the risks involved. While it might seem daunting, with the right guidance, you can safely replace your battery at home.

AD
How To Replace iPhone 6S Battery (Detailed Instructions)
How To Replace iPhone 6S Battery (Detailed Instructions)
How iPhone 6s was modified with 256G memory and 7,200 mAh battery (watch video)
How iPhone 6s was modified with 256G memory and 7,200 mAh battery (watch video)
How To Replace The iPhone 6's Battery
How To Replace The iPhone 6's Battery

Here's what you'll need:

  • Pentalobe P2 & iOpener - To open your iPhone
  • Replacement iPhone 6s battery
  • Spudger tool
  • Tweezers
  • butter knife (optional)
  • команды для установки новой батареи (optional)

Understand the iPhone Battery Replacement Risks

Replacing an iPhone battery at home comes with risks. The most significant is damaging your phone. Since the iPhone is water-resistant, opening it can compromise this feature. It's also possible that you might break components like the display or the glass. Keep these risks in mind as you proceed.

Here's how to replace the battery in an Apple iPhone 6S - CNET
Here's how to replace the battery in an Apple iPhone 6S - CNET
DIY iPhone 6 Battery Replacement - Very Easy!
DIY iPhone 6 Battery Replacement - Very Easy!

Before You Start

  • Make sure your iPhone is off.
  • Back up your iPhone to iCloud or iTunes.
  • Have a friend help you—four hands are better than two in this situation.

Step-by-Step Guide: Replacing Your iPhone 6S Battery

Now that you're prepared, let's replace your iPhone 6s battery. Follow these steps carefully:

AD

Open Your iPhone

The first step is to open your iPhone. Start by using the iOpener to warm up the edge of your iPhone. This makes removing the screen easier. Then, use the Pentalobe P2 tool to remove the two screws at the bottom of your iPhone. Next, use the Spudger tool to pry up the bottom edge of the screen. Be patient and take your time to avoid breaking anything.

Once you've removed the bottom edge, use the Spudger tool to carefully work your way around the sides and top edge of the screen. You should be able to slide the screen up and off. Remember, the display and touch ID cable is still attached, so don't pull too hard.

Remove the Old Battery

With the screen off, locate the battery at the top of the iPhone. Use the Spudger tool to disconnect the battery connector. Then, use the same tool to carefully pry up the bottom edge of the battery. Be gentle to avoid bending or damaging the battery.

AD

Once you've pried up the bottom edge, use the tweezers to lift the battery out. You'll see why this is a two-person job. While one person holds the battery up, the other can use the tweezers to disconnect the two battery connectors.

Insert the New Battery

Now that the old battery is out, it's time to insert the new one. First, connect the two battery connectors to the new battery. Then, use the tweezers to guide the battery into place. The connectors should face up.

Once the battery is in place, use the Spudger tool to press down on the bottom edge of the battery. Then, reconnect the battery connector. Make sure it's securely connected—the last thing you want is for your iPhone to turn on with the battery half-connected.

AD

Reassemble Your iPhone

With the new battery in place, it's time to reassemble your iPhone. Start by putting the screen back in place. First, connect the display and touch ID cable to the logic board. Then, align the top and bottom edges of the screen with the iPhone's body. Finally, press down gently on the bottom edge of the screen until it snaps into place.

Once the screen is back on, use the Pentalobe P2 tool to put the two screws back in. Finally, use the iOpener to cool down the iPhone edge. Your iPhone should now be back together with a new battery!

Remember, if you've followed all the steps correctly, your iPhone warranty is void. If you're not confident in your ability to replace the battery, consider taking your iPhone to a professional service.

After you finish, turn on your iPhone and check if your battery replacement was successful. If everything works as intended, enjoy your renewed iPhone 6s! And remember, while you can't replace your iPhone's age, you can replace its battery for a fresh start. Happy fixing!

AD