how to replace a two prong plug

Easy DIY: Replace a Two-Prong Plug with Three-Prong

By Daniel Jackson
AD

Got a two-prong plug that's seen better days? Replacing it isn't as daunting as it may sound. With the right tools and steps, you can safely update your plug to a three-prong one in no time. Here's a comprehensive guide to help you understand how to replace a two-prong plug, ensuring your home and appliances stay safe.

Before we dive in, let's clear up a misconception. Two-prong plugs might seem like vintage charm, but they're actually quite outdated and unsafe. They lack the ground prong that modern three-prong plugs have, which helps prevent electric shocks. So, let's get started on making your home safer, one plug at a time.

The Tools You'll Need

First things first, gather your tools. Here's what you'll need to replace that two-prong plug:

AD
Which Wire is Hot on a Two Prong Plug? (Small Prong vs Large)
Which Wire is Hot on a Two Prong Plug? (Small Prong vs Large)
How To Replace A Plug End
How To Replace A Plug End
a man and child are looking at something with the words how to replace a 2 - prong electrical plug
a man and child are looking at something with the words how to replace a 2 - prong electrical plug

1. **Voltage tester:** To ensure the outlet is indeed dead before you start working. 2. **Wire strippers:** To cut and strip wires safely. 3. **Needle-nose pliers:** To bend and maneuver wires. 4. **Screwdriver (flathead or Phillips):** To remove the outlet's cover and screws. 5. **New three-prong electrical outlet:** Make sure it's of the same type (decora, cover plate, etc.) and amperage as the old one. 6. **Grounding wire (if needed):** If your home requires it and you don't already have a ground wire in place.

Preparation: Turning Off Power and Checking Wires

Safety always comes first. Before you start, flip the circuit breaker that controls the outlet to turn off the power.

How To Change A 2-Prong Electrical Outlet To A 3-Prong - Hunker
How To Change A 2-Prong Electrical Outlet To A 3-Prong - Hunker
GFCI Plug Receptacle: A Full Guide to GFCI Outlet Installation
GFCI Plug Receptacle: A Full Guide to GFCI Outlet Installation

Now, use your voltage tester to ensure the power is indeed off by testing the outlet's wires. If there's no power, you're good to go. If there is, double-check you've turned off the right breaker and test again.

Removing the Old Two-Prong Outlet

With power off and wires checked, remove the outlet's cover plate with a screwdriver. Then, remove the two screws that secure the outlet to the electrical box. Gently pull the outlet out of the box.

AD

Use your wire strippers to remove about 1 inch of insulation from both the black (hot) and white (neutral) wires. You should now see the copper wire underneath. Be careful not to nick the copper wire while stripping.

Wiring the New Three-Prong Outlet

Now that the old outlet is out, it's time to wire the new one. Since you're replacing a two-prong with a three-prong, you'll need to check if your home is already grounded.

Look for a bare copper wire or a green wire with a coat of insulation. If you see one, great! If not, you'll need to run a new ground wire or hire an electrician to do so.

AD

Wire Connections: Hot, Neutral, and Ground

Start by connecting the wires to the new outlet. The outlet should have three screws: one silver (hot), one gold (neutral), and sometimes one green (ground).

First, wrap the black (hot) wire around the silver screw and tighten it securely. Next, do the same with the white (neutral) wire and the gold screw. If you have a ground wire, wrap it around the green screw and tighten.

Reattach the Outlet and Test Your Work

With all wires secure, carefully push the outlet back into the electrical box. Reattach the cover plate with screws, ensuring the outlet is secure and flush with the wall.

AD

Now's the moment of truth. Turn the power back on at the circuit breaker and flip the switch by the outlet. The outlet should now function as a safe three-prong plug. Use your voltage tester to double-check that the ground wire (if present) is live.

Things to Avoid When Replacing a Two-Prong Plug

While we've covered the how-to, let's quickly address what not to do:

Never attempt to convert a two-prong outlet to three-prong without ensuring your home is grounded. If you're unsure, always consult a licensed electrician.

Also, avoid using outlets that are damaged or show signs of wear, like cracked covers or melted plastic. These are clear indications that it's time for an upgrade.

And there you have it! You've successfully learned how to replace a two-prong plug with a safer three-prong one. Now that you've mastered this skill, you can keep your home up-to-date and safe from potential electrical hazards. Stay handy, and happy DIY-ing!

AD