how to replace a toyota key fob battery

Toyota Key Fob Battery Replacement: A Step-by-Step Guide

By John Martin
AD

Is your trusty Toyota key fob suddenly showing signs of fading battery life? Don't panic, it's a common issue and a quick, hassle-free fix. Replacing a Toyota key fob battery is a straightforward process that you can tackle at home, saving you time and money. Let's guide you through the simple steps involved in this task.

Before we dive into the process, it's essential to have the right battery on hand. Toyota key fobs typically use a CR2032 or CR1632 coin cell battery. You can find these at most electronics stores or even in your local supermarket. Now, let's get started with the steps to replace your Toyota key fob battery.

The Tools and Preparation Needed

The process involves minimal tools. Here's what you'll need:

AD
How to ● Toyota Key Fob Remote Keyless Battery Change/Replace
How to ● Toyota Key Fob Remote Keyless Battery Change/Replace
How to ● Toyota Key Fob Remote Keyless Battery Change/Replace
How to ● Toyota Key Fob Remote Keyless Battery Change/Replace
How to Replace Your Toyota Key Fob Battery - McPhillips Toyota Car Guide
How to Replace Your Toyota Key Fob Battery - McPhillips Toyota Car Guide
  • Replacement battery (CR2032 or CR1632)
  • Flathead screwdriver
  • Magnet or small piece of tape (for holding small parts)

Once you have all the necessary items, find a well-lit, clean workspace to ensure a smooth process.

Finding the Battery Compartment

Every Toyota key fob has a small hole on one side, which is the key release. This is also where you'll pry off the back cover. The battery compartment is located under this cover.

How to Change the Battery in Your Car Key Fob
How to Change the Battery in Your Car Key Fob
a car keychain sitting on top of a wooden table
a car keychain sitting on top of a wooden table

Some Toyota key fobs have a small, slotted design on the back cover, which can be opened with a special tool provided by Toyota. If your key fob doesn't have this design, don't worry; you can use a flathead screwdriver instead.

Prying Off the Back Cover

Insert the flathead screwdriver into the key release hole or the small slot on the back cover. Gently twist the screwdriver to pry off the back cover. Be careful to avoid breaking the plastic tabs that hold the cover in place.

AD

You may encounter a slight resistance due to the plastic tabs. If this is the case, gently twist the screwdriver back and forth until you feel the tabs loose. Once the tabs are freed, lift the cover off to access the battery compartment.

Removing the Old Battery and Inserting the New One

With the back cover removed, you'll see the battery held in place by a small clip. Using the flathead screwdriver, carefully slide it under the clip and lift it up to release the battery.

Take note of the battery's orientation before removing it. The + and - signs should be facing up. Also, most batteries have a small indented arrow; make sure to position the new battery the same way.

AD

Removing the Old Battery

Slide the flathead screwdriver under the clip and lift it up. The battery should pop out easily. If it doesn't, gently pry it out with the screwdriver. Be careful not to damage the battery contacts on the key fob.

Once the old battery is out, use a magnet or a small piece of tape to prevent it from falling into a crack or rolling away. It's a small but may seem like a monumental task to find a tiny battery!

Inserting the New Battery

Position the new battery with the + side facing up and the indented arrow pointing in the same direction as the old battery. Press the battery into place until it snaps into the battery compartment. Ensure that the battery is flush with the compartment, with no gaps.

AD

The small clip should now be holding the new battery in place. If it doesn't, gently press it down until it clicks into place.

Putting Everything Back Together

Carefully align the back cover with the key fob and press down firmly and evenly to snap it back into place. You should hear the plastic tabs clicking back into their original positions.

The back cover may not snap back on as securely as it was originally. This is normal and doesn't affect the key fob's functionality. If it's particularly loose, you can apply a small amount of super glue to the tabs without affecting the key fob's performance.

Testing Your Toyota Key Fob

Now, let's test your newly rejuvenated Toyota key fob. Try unlocking and locking your car to ensure that the battery replacement was successful. If your key fob still doesn't work, you may have inserted the battery upside down. Double-check the battery's orientation and try again.

If your Toyota key fob is still not working, it might be necessary to reprogram it or replace it entirely. However, if it's working perfectly, then congratulations, you've successfully replaced your Toyota key fob battery!

Remember, it's essential to replace the battery in your Toyota key fob as soon as you notice signs of wear. This will prevent any unexpected lockouts or inconveniences. Happy drives!

AD