how to replace a three handle bathtub faucet

Step-by-Step Guide: Replace a Three Handle Bathtub Faucet

By Christopher Lewis
AD

Tackling a DIY project to replace a three-handle bathtub faucet can not only save you money on plumbing services, but also provide a great sense of accomplishment. With the right tools and a bit of patience, you can refresh your bathroom's look in a single afternoon. Let's dive into a step-by-step guide to help you revitalize your space.

Before you begin, make sure you have all the necessary tools and materials. You'll need a new three-handle faucet, adjustable wrenches, an Allen wrench (if required), a putty knife, plumber's grease, and a towel. Having these items on hand will ensure a smooth and successful project.

Preparation: Gather Tools and Materials

Assemble all the necessary tools and materials before starting to avoid mid-project trips to the hardware store. Unpack your new faucet and lay out all the parts, ensuring you have the-package. Also, make sure to turn off the water supply valves under the sink or behind the bathtub to prevent any water-related mishaps.

AD
Three Handle Tub Faucet Replaced
Three Handle Tub Faucet Replaced
How to Replace a Bathtub Faucet
How to Replace a Bathtub Faucet
Replacing a three handle tub shower faucet with Moen Posi-Temp
Replacing a three handle tub shower faucet with Moen Posi-Temp

Once you've prepared your workspace and gathered your tools, it's time to remove your old faucet. This process involves disconnecting the water supply lines and unscrewing the faucet from its mounting base.

Removing the Existing Faucet

Start by using an adjustable wrench to loosen and remove the supply lines attached to the faucet. These lines are usually located behind the access panel under the sink or behind the bathtub. Once disconnected, wrap the ends of the supply lines with rags or use caps to prevent water from dripping.

Video (longer version): Replace a Bathtub Faucet Handle
Video (longer version): Replace a Bathtub Faucet Handle
Three Handle Tub Faucet Replaced
Three Handle Tub Faucet Replaced

Next, use the same adjustable wrench to remove the mounting nuts that hold the faucet in place. You might need to use an Allen wrench if your faucet has specific mounting screws. With the nuts or screws removed, carefully lift the faucet out of the mounting base, taking note of the orientation and position of the old parts.

Cleaning and Preparing the Mounting Base

After removing the old faucet, use a putty knife to scrape away any old plumber's glop or Wilmington Pelletin from the mounting base and the underneath of the faucet. This will help create a smooth surface for applying new plumber's grease and ensure a tight, maintenance-free seal for your new faucet.

AD

Before installing the new faucet, inspect the mounting surface and threads for any damage. If necessary, repair or replace any damaged parts to ensure a secure fit for your new faucet. Also, check that the mounting base and plumbing connections are level and properly aligned to accommodate your new faucet.

Installing the New Faucet

With the mounting base clean and prepared, it's time to install your new three-handle bathtub faucet. Begin by applying plumber's grease to the threads of the faucet and the mounting base. This will help create a watertight seal and make it easier to remove the faucet for future maintenance.

Carefully position the new faucet onto the mounting base, ensuring that the handles and spout are correctly aligned with the faucet's outlets. Once in position, secure the faucet using the mounting nuts or screws. Tighten them snugly, but be careful not to overtighten and damage the faucet or connections.

AD

Reconnecting the Water Supply Lines

With the faucet securely mounted, reconnect the water supply lines to the new faucet's inlets. Make sure to hand-tighten the supply lines first, then give them a quarter turn with your adjustable wrench to ensure a solid connection.

Before turning the water supply back on, wipe away any grease or debris from the new faucet and surrounding area. Then, slowly turn the water supply valves back on and check for any leaks around the faucet and supply lines. If everything is leak-free, your new three-handle bathtub faucet is now fully functional and ready to upgrade your bathroom's look.

Test and Enjoy Your New Faucet

Congratulate yourself on a job well done! To ensure that your new faucet is working correctly, test each handle and observe the water flow. Make any necessary adjustments to the handles or connections if the water flow is not as expected. Once you're satisfied with the performance of your new faucet, sit back and enjoy your refreshed bathroom space.

AD

Updating your bathtub faucet can significantly enhance your bathroom's appearance and functionality. By following this comprehensive guide, you'll be well on your way to achieving excellent results. Happy DIY-ing, and may your new faucet bring you many years of satisfactory use!

AD