how to replace a skylight dome

Easily Replace a Skylight Dome: Step-by-Step Guide

By Hannah Garcia
AD

Replacing a skylight dome is a significant home improvement task that can enhance your space's natural light and aesthetics. If your existing skylight is leaky, outdated, or simply not your style, here's a comprehensive guide on how to replace it, step by step.

Before you begin, remember that this project requires some basic skilled work and specialized tools. If you're uncomfortable or uncertain about any part of the process, consider hiring a professional. Safety should be your top priority, so always follow manufacturers' instructions, wear appropriate safety gear, and ensure your work area is secure.

Understanding Skylight Domes and Replacement Options

Skylights typically come in two types: vented and fixed. Vented skylights can be opened for ventilation, while fixed skylights are permanently sealed. Both types can be replaced, although the process varies slightly. Here, we'll focus on replacing a standard, flat-glass skylight dome.

AD
DIY Replacement polycarbonate skylight domes: How do you fix a cracked skylight dome?
DIY Replacement polycarbonate skylight domes: How do you fix a cracked skylight dome?
Installing a replacement skylight dome
Installing a replacement skylight dome
How To Replace A Skylight Dome – Storables
How To Replace A Skylight Dome – Storables

When choosing a new skylight, consider the frame material (aluminum, vinyl, or wood), glass type (tempered, double-pane, or coated), and any additional features like built-in shades or rain sensors.

Check compatibility and measurements

Ensure your new skylight is the same size and type as the one you're removing. Measure the opening, including the framing, to be certain. Most skylights come with flashing kits designed to fit specific sizes, so accurate measurement is crucial.

Go Solar for a Smarter Home
Go Solar for a Smarter Home
Replacement Skylight Domes
Replacement Skylight Domes

Also, verify that the new skylight's installation requirements match your existing setup. Some skylights may require electrical connections for features like remote control or automatic operation. Ensure your new skylight is compatible with your current roof structure and electrical system.

Gather necessary tools and materials

Before starting, gather all necessary tools and materials to ensure a smooth installation process. You'll need a ladder, safety harness, pry bar, flathead screwdriver, utility knife, tape measure, level, and a drill with the appropriate screws. You may also need a circular saw, depending on your roof type.

AD

Additionally, have your new skylight, flashing kit, and any necessary fasteners, sealants, and adhesives on hand. Always follow the manufacturer's instructions for specific tools and materials required for your new skylight.

Removing the Old Skylight Dome

Before starting, consult your local building codes and obtain any necessary permits for your project. Once you're ready, begin by ensuring your roof is safe to work on. Clear debris, secure any loose tiles or shingles, and set up your ladder properly.

Wear sturdy footwear and a safety harness to prevent falls. Approach the skylight area cautiously, as the glass may be fragile or broken.

AD

Safely remove the old skylight

Start by removing any protective covering over the skylight, such as a screen or storm shield. Use a flathead screwdriver to pry off the skylight's glazing beads – these are the metal strips that hold the glass in place. Be careful not to damage the roof deck or insulation while doing so.

With the beads removed, you can carefully lift the glass out of the opening. If the glass is broken or difficult to remove, wear gloves and protective clothing to avoid injury. Once the glass is out, set it aside carefully to reuse the frame if possible.

Remove the old frame and prepare the opening

Using a pry bar, gently remove the old frame from the roof opening. If the frame is nailed or screwed onto the roof, use a drill to remove the fasteners carefully. Ensure you don't damage the roof deck or create gaps for water to seep through.

AD

Inspect the opening for any nails, screws, or remaining installation materials. Clean the opening thoroughly, and ensure it's free of debris and old sealant. If necessary, use a circular saw to adjust the opening's size to match your new skylight.

Installing the New Skylight Dome

Before installing the new skylight, inspect it for any damage or deficits. Ensure all components are included and match the manufacturer's instructions. Once you're ready, begin the installation process.

For this guide, we'll assume you're installing a new frame along with the skylight. If you're reusing the existing frame, consult the manufacturer's instructions for specific installation steps.

Install the underlayment and flashing

Before installing the new skylight, apply a self-adhesive underlayment or felt paper around the opening to protect the roof deck from moisture. Secure the underlayment with roofing nails or staples, ensuring it overlaps the roof surface properly.

Next, install the flashing kit according to the manufacturer's instructions. This typically involves installing a continuous metal flashing around the skylight opening, with stepped or}\!entededges to redirect water away from the skylight. Ensure the flashing is fitted securely and seals against the roof and skylight frame.

Install the new skylight frame and glass

Position the new skylight frame in the opening, ensuring it's level and plumb. Secure the frame to the roof using the appropriate fasteners provided in the flashing kit. Follow the manufacturer's instructions for spacing and attachment method.

Once the frame is securely fastened, install the new skylight glass or dome. Ensure it fits snugly within the frame, and there are no gaps or spaces where water could seep through. If your skylight has glazing beads, install them around the edges to secure the glass in place.

Sealing and Finishing the Installation

With the new skylight installed, it's essential to ensure a watertight seal around the opening. Apply a high-quality roofing sealant, such as butyl tape or silicone, around the perimeter of the skylight, ensuring it adheres to both the frame and flashing.

Next, inspect the installation for any gaps, holes, or damaged areas that could allow water infiltration. If necessary, apply additional sealant or weatherproofing materials to protect against moisture. Ensure all components are secure and fitted correctly.

Test your new skylight

Before completing your installation, test the new skylight to ensure it's functioning correctly. For a fixed skylight, verify that the glass is secure and there are no leaks or gaps. For a vented skylight, open and close it several times to ensure the mechanism is working smoothly and the seals are tight.

If your skylight has electrical components, such as a remote control or rain sensor, connect them according to the manufacturer's instructions. Test the electrical features to ensure they're functioning correctly.

Congratulations! You've successfully replaced your old skylight dome with a new, energy-efficient model. By following these steps, you've enhanced your home's natural light, increased its value, and improved its overall appeal. Regularly inspect your new skylight for any signs of damage or wear, and enjoy the beauty and benefits it brings to your space.

AD