how to replace a samsung water filter

Step-by-Step Guide: How to Replace Your Samsung Water Filter

By Matthew Lee
AD

Need to replace your Samsung water filter? You're not alone. Regular filter replacement is crucial for maintaining clean, fresh water and the lifespan of your Samsung refrigerator's water dispenser. Here's a step-by-step guide to help you through the process.

Before you start, ensure you have the following tools and materials: new Samsung water filter (like the DA29-00020B/DA29-00020C), a small bowl, and a towel or rag. Additionally, make sure your refrigerator is plugged in and the water dispenser and icemaker are turned off.

Preparing for Filter Replacement

First, locate the water filter. On Samsung fridges, it's usually found between the crisper drawers, behind a small panel. If your model has a different location, consult your user manual.

AD
How To Change The Water Filter In A Samsung Refrigerator and Reset Water Filter Light
How To Change The Water Filter In A Samsung Refrigerator and Reset Water Filter Light
How to Replace a Samsung Refrigerator's Water Filter
How to Replace a Samsung Refrigerator's Water Filter
Why Does Samsung Water Filter Not Push In?
Why Does Samsung Water Filter Not Push In?

Next, empty any remaining water in the old filter by twisting and pulling it counterclockwise. This should release the water into a bowl you've placed underneath.

Preparing the New Filter

Before installation, you'll need to prepare the new filter. First, remove the protective cap from both ends of the filter. Then, wet the surface of the filter with warm water. This helps activate the carbon core and removes any loose particles.

Step-by-Step Guide to Samsung Refrigerator Water Filter
Step-by-Step Guide to Samsung Refrigerator Water Filter
How To Replace Samsung Refrigerator Water Filter
How To Replace Samsung Refrigerator Water Filter

After wetting, place the filter on a towel or rag to avoid dripping and allow it to saturate for about 5-10 minutes. This process helps prevent air from getting trapped inside during installation and ensures maximum contaminant reduction.

Installing the New Filter

Now that the new filter is prepared, it's time for installation. Push the new filter into the compartment where you removed the old one. Twist it clockwise until it locks into place. You might hear a click or feel some resistance; this is normal.

AD

Once the filter is securely in place, reattach the water inlet cap (if your model has one) and discard the old filter according to your local recycling guidelines.

Priming the System

After installation, it's important to prime the system to rid it of any trapped air and ensure maximum filter performance. Begin by turning on the dispenser and holding a bowl under it to catch any water. Release about 5-8 glasses of water.

Next, firmly press and hold the water dispenser button for about 3-5 seconds. This primes the system by sending water through the filter and into the dispenser. Repeat this process a few times until the water flows freely without any air bubbles.

AD

Congratulations! You've successfully replaced your Samsung water filter. Remember, it's important to replace your water filter every 6 months or according to your model's specifications for optimal performance. Enjoy your fresh, clean water!

AD