how to replace a mortise lock

How to Replace a Mortise Lock: Step-by-Step Guide

By Anthony Allen
AD

Having trouble with a sticky or broken mortise lock? Don't let it hold you back from making your home secure and functional. Replacing a mortise lock is a straightforward DIY task that can save you the time and cost of hiring a professional. Here's a comprehensive guide to walk you through the process step by step.

Before you start, gather your tools: a screwdriver, a hammer, a chisel, a new mortise lock that matches your old one, and some patience. Remember, safety first. Turn off any power to the lock, and if you're unsure about any step, don't hesitate to consult a professional.

Removing the Old Mortise Lock

Here, we'll guide you through taking out the old lock. The process will be similar for different types of mortise locks, but with some variations. Let's dive into the details.

AD
How to Rehand Mortise Lockset
How to Rehand Mortise Lockset
How to Replace a Mortise Lock With a Cylindrical Lock | ehow.com
How to Replace a Mortise Lock With a Cylindrical Lock | ehow.com
How to install a Mortise Mortice Lock and handles
How to install a Mortise Mortice Lock and handles

The first step is to remove the faceplate of the lock. On most locks, you can do this by turning the inside knob and pulling it towards you. If it doesn't budge, you might need to use a screwdriver to unlock it. Once the knob and rose (the decorative plate) are off, you should be able to unscrew the faceplate.

Accessing the Mortise Lock from the Inside

Now, let's focus on removing the lock itself. With the faceplate off, you should see two or more screws holding the lock in place. Unscrew these and pull the lock out from the inside.

How to Measure - Install Half Mortise Locks
How to Measure - Install Half Mortise Locks
Cleaning and Repairing an Antique Mortise Door Lock
Cleaning and Repairing an Antique Mortise Door Lock

If the lock is stuck, don't force it. Use a screwdriver to gently tap around the edges of the lock. This should loosen it up, and it should come out easily. If the lock is exceedingly stuck, you might need to use a chisel and hammer to carefully chisel away at the surrounding wood. Be cautious not to damage the door frame.

Handling the Lock from the Outside

From the outside, you'll likely find that the lock is held in place with another set of screws. Unscrew these as well. Then, from the inside, try to pull the lock out again. If it's not moving, you might need to access the door from the outside.

AD

If you need to chisel away at the door from the outside, be extremely careful. It's easier to damage the door frame from this side. Once you've removed the old lock, clean up any debris and get ready to install the new one.

Installing the New Mortise Lock

Now that you've successfully removed the old lock, it's time to install the new one. The process is mostly reverse of the removal, with some additional steps to ensure a tight fit.

First, fit the new lock into the mortise hole. The top of the lock should align with the top of the mortise hole, and the lock body should fit snugly inside. If it's too tight, you might need to chisel away a little more. If it's too loose, insert some wood shims to tighten it up.

AD

Marking the Door for Screws

Once the lock fits tightly, use a pencil to mark the screw holes on the door. The marks should be just outside the edge of the lock, to ensure the screws will fit.

Next, use a drill bit that's a bit smaller than your screws to drill pilot holes at your marks. This will make it easier to insert the screws later and prevent the wood from splitting. If you're drilling from the outside, be extra careful to drill straight into your marks. You don't want to drill into the door frame or the inside of the door.

Securing the Lock in Place

With the pilot holes drilled, it's time to secure the lock in place. Start by inserting the lock all the way into the mortise hole. From the outside, insert one of your screws into a pilot hole and start screwing it in. Don't screw it in too tightly, as you'll need to thread the lock spindle through it.

AD

Once you've screwed in all the screws, but not too tightly, it's time to thread the lock spindle. From the inside, push the lock spindle (the metal rod that connects the inside and outside knobs) through the square hole in the lock. This might take a little jiggling to get it in the right spot.

Finally, put on the faceplate, then the rose, and then the inside knob. Once everything is on, tighten all the screws. Test the lock to make sure it works, and if it does, congratulations! You've successfully replaced your mortise lock.

Remember, if at any point you feel unsure, don't hesitate to consult a professional. Your safety and the security of your home are paramount. Now that you've mastered this skill, you're equipped to handle any mortise lock issue that comes your way.

AD