how to replace a delta faucet cartridge single handle

How to Replace a Delta Faucet Cartridge in a Single Handle

By Daniel Smith
AD

Is your Delta single-handle faucet dripping or not performing as it should? The issue might be a faulty cartridge. Replacing it is a straightforward DIY project that can save you the cost of a professional plumber. Here's a step-by-step guide to help you replace your Delta faucet cartridge like a pro.

Before you start, make sure you have the following tools and materials: adjustable pliers, an Allen wrench, a Phillips screwdriver, a silicone seal, and a new Delta faucet cartridge (matching your original's model number). Also, prepare a towel or rag to catch any water drips.

Preparation and Disassembly

Start by turning off the water supply to your faucet. Under the sink, locate the water supply lines and turn the shutoff valves clockwise until they stop. Next, open the faucet to release any remaining water pressure.

AD
HOW TO FIX A LEAKY DELTA FAUCET - Replacing a Valve Cartridge on a Single Handle Delta Faucet. Easy!
HOW TO FIX A LEAKY DELTA FAUCET - Replacing a Valve Cartridge on a Single Handle Delta Faucet. Easy!
Delta Faucet Repair Single Handle
Delta Faucet Repair Single Handle
How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove Your Delta Shower Handle: A Complete Guide

Look for an escutcheon (the decorative cover under the handle) on your faucet. Remove it using a Phillips screwdriver. Under the escutcheon, you'll see a setscrew. Using an Allen wrench, loosen and remove the setscrew. This will allow you to lift off the faucet handle.

Removing the Old Cartridge

With the handle removed, you should see the cartridge. Unscrew the lock ring using adjustable pliers. If it's too tight, wrap the pliers' jaws with electrical tape to provide better grip and avoid damaging the ring.

Delta Single Handle Faucet Cartridge Replacement
Delta Single Handle Faucet Cartridge Replacement
How to Replace a Delta Tub or Shower Cartridge
How to Replace a Delta Tub or Shower Cartridge

Once the lock ring is off, gently pull the cartridge straight up and out of the faucet body. Be prepared for some water to drip out. If the cartridge is stuck, try wiggining it gently from side to side.

Inspecting the Cartridge Seat

Before installing the new cartridge, take a moment to examine the cartridge seat in the faucet body. It should be smooth and even. If it's damaged, you may need to replace the faucet body.

AD

Wipe the cartridge seat clean and apply a thin coat of silicone seal to the new cartridge's O-ring. This will help create a better seal and prevent leaks.

Installing the New Cartridge

Carefully insert the new cartridge into the faucet body, making sure it's properly aligned. Once the cartridge is fully seated, place the lock ring over the top and hand-tighten it. Don't overtighten, as this can damage the cartridge and faucet body.

Replace the faucet handle and secure it with the setscrew using the Allen wrench. Reattach the escutcheon using the Phillips screwdriver.

AD

Reassembling and Testing

Turn the water supply valves counterclockwise to restore water flow to the faucet. Turn the faucet handle on and off a few times to ensure the cartridge is working correctly and that there are no leaks.

If you encounter any resistance or leaks, turn off the water again and double-check that the cartridge and lock ring are properly seated. If all is well, your Delta faucet should be as good as new!

Regular maintenance and prompt replacement of faulty parts help extend the life of your faucet. If you're unsure about any part of this process, don't hesitate to call a professional plumber. Happy DIYing!

AD
AD