how to replace a control arm

How to Replace a Control Arm: Step-by-Step Guide

By Joshua Lee
AD

Has your vehicle's handling become noticeably less crisp, or do you hear strange noises when turning? It might be time to replace your control arms. Control arms may seem like a small, minor component, but they play a crucial role in your vehicle's suspension and steering systems. They connect the vehicle's body to the wheels, allowing for movement and supporting the vehicle's weight. In this guide, we'll walk you through the process of replacing a control arm, step by step, ensuring you understand each procedure for a safe and successful repair.

Before we dive into the process, let's ensure you have the right tools and parts. You'll need a jack, jack stands, a lug wrench, Metric socket and wrench set, a wire brush, and, of course, the new control arm designed for your specific make and model. Always consult your vehicle's manufacturer guidelines to ensure you're using the correct replacement part.

Safety Preparations and Removing the Old Control Arm

Safety is paramount when working on your vehicle. Begin by parking your car on a flat, stable surface and engaging the parking brake. Use wheel chocks to secure the tires and prevent the vehicle from rolling. Before jacking up your car, ensure it's safe to do so, with no vehicles or obstructions nearby that could cause the car to shift unexpectedly.

AD
How Long Does It Take To Replace Control Arms On Your Vehicle?
How Long Does It Take To Replace Control Arms On Your Vehicle?
Testing Autos: Car Care Articles
Testing Autos: Car Care Articles
How to Replace Control Arm Bushings (EASY)
How to Replace Control Arm Bushings (EASY)

Once your vehicle is secure, jack it up and support it with jack stands under the vehicle's frame or control arm mounting point to ensure stability during the repair process. Locate your old control arm and identify the components that will need to be disconnected and removed.

Disconnecting the Control Arm

Begin by disconnecting the control arm from the ball joint or bushing, depending on your vehicle's design. You may need to use a ball joint separator tool to help release the pressure between the ball joint and the steering knuckle. Gently pry the ball joint out of its socket using a large pry bar or a hammer and a suitable drift. If your control arm uses a bushing instead, you'll need to remove it entirely to disconnect the arm.

How to replace your upper and lower control arm bushings
How to replace your upper and lower control arm bushings
Replacing Lower Control Arm
Replacing Lower Control Arm

Next, remove any bolts or hardware connecting the control arm to the vehicle's body or frame. On some vehicles, the control arm is held in place by long bolts that pass through the arm and into the vehicle's frame. These bolts may have hex nuts at one end and cotter pins or lock washers at the other. Make sure to keep these bolts and hardware organized, as you'll be reusing them during the installation of the new control arm.

Removing the Old Control Arm

With the ball joint or bushing disconnected and all bolts removed, the old control arm should now be loose. In some cases, you may need to use a pickle fork or a suitable pry bar to help remove the control arm by insertion between the arm and the vehicle's frame or body. Be careful not to damage any surrounding components during this process.

AD

Once you've successfully removed the old control arm, inspect the area for any signs of damage, rust, or wear. Clean the mounting points and install any new hardware, such as bushings or ball joints, if the new control arm doesn't come with these components pre-installed. If you notice any excessive wear or damage, it might be a good idea to inspect and possibly replace other related components, such as your vehicle's bushings, tie rod ends, or ball joints, to ensure optimal performance and longevity for your new control arm.

Installing the New Control Arm

Now that the old control arm has been removed, it's time to install the new one. Begin by aligning the new control arm with the mounting points on the vehicle's body or frame. Reinstall any new bushings or ball joints at this point if necessary. Ensure that the new control arm is correctly positioned and aligned with all the relevant components before proceeding.

The installation process is essentially the reverse of the removal process. Start by reinstalling any bolts or hardware that connect the control arm to the vehicle's body or frame. Tighten these bolts gradually and evenly to ensure the control arm is firmly secured in place. On vehicles with long bolts, ensure that the cotter pins or lock washers are secured and properly fit.

AD

Reconnecting the Control Arm

Next, reconnect the new control arm to the ball joint or bushing. If your vehicle uses a ball joint, ensure it's properly seated and secured within the socket. Use the ball joint separator tool to press the joint back into its socket if needed. On vehicles with bushings, secure the control arm to the bushing and ensure it's properly seated and aligned.

With the control arm reconnected, lower your vehicle and check for proper alignment and functionality. Take a test drive at low speeds to ensure the new control arm is working correctly and that your vehicle's handling has improved. Keep an eye on the control arm and its components during the first few hundred miles of driving, as this is a critical break-in period for new control arms and their related components.

Final Touches and Re-assembly

If everything feels secure and works as expected, replace the wheel and lower the vehicle completely. Tighten the lug nuts with a torque wrench to the manufacturer's specified torque setting. Don't forget to remove the jack stands and wheel chocks before driving your vehicle. Finally, discard any trash or used materials and store your tools safely for future use.

AD

Replacing a control arm might seem daunting at first, but with the right tools, knowledge, and patience, it's a task well within the capabilities of many DIY enthusiasts. By following this guide, you've not only saved money by performing the repair yourself, but you've also gained valuable insight into your vehicle's suspension and steering systems. Regular maintenance and timely repairs are key to keeping your vehicle in top shape. So, drive safe, and keep your vehicle happy!"

AD