Step-by-Step: How to Replace a Car Cigarette Lighter
Tired of your car cigarette lighter not working anymore? Don't let it dampen your drive; we've got you covered with our step-by-step guide on how to replace a car cigarette lighter. Let's dive right in.
Replacing a cigarette lighter in your car might seem daunting, but with the right tools and a little patience, you'll have it sorted in no time. This guide assumes you're working on a vehicle with an interior that allows access to the lighter's harness. If your car's design doesn't permit this, consider taking it to a professional mechanic.
Understanding Your Car Cigarette Lighter
The cigarette lighter in your car is part of a larger electrical system. It's connected to a harness that houses the wiring and a heating coil. When you insert the lighter, a springloaded mechanism extends the coil into an insulated socket, providing a high electrical current to heat it up.
A common reason for cigarette lighters to stop working is a burnt-out heating coil or a faulty spring mechanism. Sometimes, the problem could be in the wiring harness, like a severed wire or poor contact. Let's troubleshoot these issues and walk you through the replacement process.
Preparation: Tools and Safety Measures
Before you start, gather these essential tools: a flathead screwdriver, a Phillips screwdriver (if your car has screws holding the ashtray or center console in), a multimeter for testing the wiring, and a new cigarette lighter assembly or heating coil (depending on the problem). Ensure you buy a replacement that's compatible with your car's make and model.
Safety first! Disconnect the negative (-) battery cable before you start working on your car to prevent short circuits. Also, work in a well-lit area and consider wearing gloves to protect your hands from sharp edges.
Diagnosing the Problem
Before replacing parts, try locating the problem using a multimeter. Set it to measure resistance (ohms). Follow the wires from the cigarette lighter socket to their connectors under the dashboard. Test each wire for continuity by touching one probe to each end. If there's no continuity (resistance is infinite), you've found a broken wire.
In some cases, the problem might be with the cigarette lighter's heated coil. Test this by touching one probe to each of the coil's terminals. If there's no continuity, the coil has burnt out and needs replacing.
Replacing the Cigarette Lighter Heating Coil
Replacing the heating coil is generally straightforward, provided you can access the wiring harness. Here's how:
1. Disconnect the negative (-) battery cable to prevent electrical shorts. Locate the cigarette lighter connector under the dashboard. It could be behind the center console, under the glove box, or behind the ash tray.
Accessing the Heating Coil
2. Using a flathead or Phillips screwdriver, carefully remove the ash tray or center console (whichever houses the cigarette lighter) to expose the lighter's socket. For some cars, you might need to remove screws, while others may use click-in panels. Be mindful not to damage any clips or break them off.
3. Once you've exposed the socket, locate the heating coil. It's usually held in place by a metal spring clip. Use needle-nose pliers or a flathead screwdriver to gently press down on the clip and release the coil.
Removing and Replacing the Heating Coil
4. With the coil released, pull it out gently. There may be a little resistance, so be patient. Once out, check if the coil terminals are firmly connected to the wiring harness. If they're loose or damaged, you might need to replace the entire harness rather than just the coil.
5. Insert the new heating coil in reverse order. Ensure the terminals slot into the harness securely. Then, press down on the spring clip to secure the coil in place.
6. Replace the ash tray or center console, ensuring everything clicks back into place securely. Reconnect the negative (-) battery cable, then test your new cigarette lighter. It should light up perfectly now!
Replacing the Entire Cigarette Lighter Assembly
Sometimes, replacing just the heating coil might not cut it. If the wiring harness is damaged or the socket itself is faulty, you'll need to replace the entire cigarette lighter assembly. Here's how:
7. Disconnect the negative (-) battery cable and locate the cigarette lighter connectors under the dashboard. After exposing the lighter's socket, disconnect the wiring harness from the socket.
Removing and Replacing the Assembly
8. Unbolt the cigarette lighter assembly from the area under the dashboard where it's installed. This usually involves removing a few bolts with a wrench or screwdriver.
9. With the assembly unbolted, carefully remove it from the dashboard. Ensure you don't damage any surrounding components. Once it's out, inspect the wiring harness. If it's damaged, you'll need to replace the entire assembly, including the new harness and socket.
10. Install the new cigarette lighter assembly in reverse order, ensuring the wiring harness is properly connected and secured. Bolt it back in place, and secure it tightly.
11. Reconnect the wiring harness and the negative (-) battery cable. Test your new cigarette lighter to ensure it works perfectly. If everything's secure and connected correctly, it should light up on your first try.
There you have it! You've just successfully replaced your car's cigarette lighter. Regular maintenance like this will keep your car's electrical system running smoothly, enhancing your driving experience. Happy roads ahead!