how to remove yakima roof rack

Easy Steps to Remove Yakima Roof Rack: A Comprehensive Guide

By Melissa Jackson
AD

Tired of your Yakima roof rack causing excessive wind noise or compromising your vehicle's aerodynamics while sitting unused? Removing your Yakima roof rack doesn't have to be a complicated task. With the right tools and steps, you can safely remove your Yakima roof rack in no time, ready to été restored to your car's sleek, original appearance.

Before you begin, make sure to gather the necessary tools: a ratchet or socket wrench, a pry tool or flathead screwdriver, and a towel to prevent scratches. Also, ensure your roof rack is compatible with your vehicle's roof type – Yakima offers specific solutions for factory rails, raised side rails, and bare roofs. Let's dive into the process.

Preparation for Removal

Before you start removing the roof rack, ensure your vehicle is clean and dry. This will provide a better grip and prevent potential damage. Additionally, place a towel over your vehicle's surface to prevent scratches from the tools you'll be using.

AD
How to Remove Roof Rack
How to Remove Roof Rack
Yakima BaseLine + JetStream Roof Rack Installation And Overview
Yakima BaseLine + JetStream Roof Rack Installation And Overview
the side of a white truck with black metal bars on it's front end
the side of a white truck with black metal bars on it's front end

Clear your roof of any cargo or accessories that might be attached to your roof rack. Make sure you have all the necessary tools at hand to streamline the process.

Identify Roof Rack Components

Yakima roof racks consist of several components. Familiarize yourself with the main parts: the towers (or legs), crossbars, and feet. The towers attach directly to your vehicle's roof, while the feet connect the crossbars to the towers. Understanding these components will help you follow the removal process accurately.

How to Install Roof Racks
How to Install Roof Racks
Roof Rack Installation: How-To Guide (2026)
Roof Rack Installation: How-To Guide (2026)

Pay close attention to the different types of securements used, such as wind fairings, cam clamps, or SlideDirect bolts. The securement type will dictate the specific tools and techniques you'll need to use for each step.

Locate and Remove Lock Cores (if applicable)

A few Yakima roof racks come with lock cores for added security. If your roof rack has lock cores, you'll need to remove them before detaching the towers. Use the provided key to unlock and remove the cores from the towers.

AD

If your roof rack doesn't have lock cores, skip this step and proceed to removing the towers.

Removing the Towers

The towers are the primary components that attach your roof rack to your vehicle's roof. Removing them requires careful attention to avoid damaging your vehicle's roof.

Before proceeding, make sure your vehicle is on a flat surface and the engine is turned off to prevent any unwelcome movements during the removal process.

AD

Remove Crossbars

Before detaching the towers, you must first remove the crossbars. Loosen the clamps or bolts holding the crossbars to the feet, then slide the crossbars off the feet completely. Set them aside for reinstallation at a later time.

If you have Yakima's Vac system, make sure to remove the Vac socket from the towers before removing the crossbars.

Disconnect Securements

Depending on your roof rack's design, you'll need to disconnect the securements before removing the towers. For wind fairings, carefully pry them off with a flathead screwdriver or a plastic pry tool. For cam clamps or SlideDirect bolts, use a ratchet or socket wrench to loosen and remove them.

AD

If you're unsure about any specific securement, consult your roof rack's user manual for detailed instructions.

Remove the Towers

Now that you've removed the crossbars and disconnected the securements, you can finally detach the towers. For bolted towers, use a ratchet or socket wrench to loosen and remove the bolts. For towers using a lock-down mechanism or snap-in system, pull upward firmly and gently wiggle the towers to release them.

If the towers are stuck or difficult to remove, try using a plastic pry tool to carefully pry them off while supporting your vehicle's roof to prevent damage.

Reinstallation and Maintenance Tips

If you plan to reinstall your Yakima roof rack at a later time, make sure to store the towers and other components safely. Keep the original packaging or use a storage box to keep everything organized and accessible for future use.

When reinstalling your roof rack, always ensure it's properly secured to your vehicle's roof. Consult your vehicle manufacturer's guidelines and Yakima's installation instructions for proper fit and securement. Regularly inspect your roof rack for any signs of wear or damage, and maintain it according to the manufacturer's recommendations to ensure its longevity and safety.

Cleaning and Storage

Before storing your Yakima roof rack, clean it thoroughly to remove any dirt, dust, or corrosion. Use a mild soap and water solution, along with a soft cloth or sponge, to wipe down the components. Avoid using abrasive cleaners or materials that could scratch the surfaces.

After cleaning, apply a light coat of grease or lubricant to any moving parts, such as bolts or pivot points, to prevent squeaking and ensure smooth operation during future installations. Allow the components to dry completely before storing them away.

That's it! You've successfully removed your Yakima roof rack and saved your vehicle's original, sleek appearance for the future. Now that you're an expert, you can easily reinstall your roof rack whenever you need extra cargo space. Happy travels!

AD