how to remove whitestone dome glass

How to Remove Whitestone Dome Glass

By Emily Martin
AD

Are you tired of looking at a cracked or fogged glass dome on your Whitestone infrared sauna or steam shower? While the glass adds a sleek touch and allows light to pass through, it unfortunately isn't invincible. Accidental cracks, scratches, or even discoloration over time can leave you with an eyesore that's ready for replacement. But how do you go about removing the glass dome? Don't worry, it's not as daunting as it may seem. Let's guide you through the process step-by-step.

Before we dive into the process, it's crucial to ensure that you're using the right techniques and tools. This guide will focus on the glass dome typically found in Whitestone products, which is usually made of tempered glass. This type of glass is particularly strong but also safety-engineered to shatter into small, rounded pieces when broken, minimizing injury risks. Understanding the material will help you work with it safely.

Gathering Your Tools and Preparing the Workspace

First things first, gather your tools. You'll need a drill with a glass and tile bit, a screwdriver, safety glasses, work gloves, and a permanent marker. It's also a good idea to have a helper on hand for larger domes, as they can be heavy and awkward to handle alone.

AD
Galaxy S10+ Whitestone Dome Glass Install, Review & Removal
Galaxy S10+ Whitestone Dome Glass Install, Review & Removal
a person holding up an electronic device in their hand
a person holding up an electronic device in their hand
How to install Whitestone Screen Protector
How to install Whitestone Screen Protector

Preparing your workspace is equally important. Lay a drop cloth or blanket beneath the dome to catch any glass pieces that may fall during the process. It's also a good idea to prepare the area where you'll be storing the removed dome, ensuring it's clean, flat, and free of sharp objects that could puncture the protective wrapping.

Marking the Glass for Cutting

Before you start drilling, you'll need to mark where you'll be cutting. This step is especially important if you're removing the entire dome, as you'll need to create straight lines to follow. Use the permanent marker to trace a grid of lines on the glass, creating sections that are easy and safe to remove. Remember, the aim is to create pie-shaped or rectangular sections that are small enough to handle safely.

How To Clean Your Apple Watch & Installation of Whitestone dome glass screen protector
How To Clean Your Apple Watch & Installation of Whitestone dome glass screen protector
How to remove Tempered Glass from iPhone EASY without tools
How to remove Tempered Glass from iPhone EASY without tools

In case you're only removing a cracked or damaged section, isolate the problem area and mark around it, leaving a border of about 2-3 inches to ensure you remove enough glass to fix the issue.

Drilling the Initial Holes

Once you've marked your cutting lines, it's time to start drilling. Put on your work gloves and safety glasses to protect against stray bits of glass. Using the glass and tile bit, drill a series of holes along your marked lines, creating a line of holes about 2-3 inches apart. This will give you a starting point for your glass cutter.

AD

Remember, don't apply too much pressure while drilling. Let the bit do the work. If you force it, you risk cracking or breaking the glass before you're ready. Also, keep the drill at a consistent angle to ensure your cuts are straight and even.

Scoring and Breaking the Glass

Now that you've drilled your initial holes, it's time to score and break the glass along your marked lines. This is where the glass cutter comes into play. If you don't have one, you can use a regular glass cutting bit in your drill. Start at one of the holes you've drilled and run the cutter or bit along your marked line, applying gentle but consistent pressure.

Once you've scored the entire line, use a flathead screwdriver or a gc glass cutter tool to carefully break the glass along the scored line. You should hear a satisfying 'pop' as the glass breaks apart. Repeat this process for each of your marked lines until the glass dome is broken into your desired sections.

AD

Removing the Glass Sections

Now that your glass is broken into manageable sections, it's time to remove them from the sauna or shower. This part can be a bit tricky, as the dome is likely secured in place with screws or bolts. Use your screwdriver to carefully unscrew or remove these fasteners, taking care not to damage the surrounding structure.

With the fasteners removed, you should be able to carefully lift out the glass sections. If the dome was glued in place, you may need to use a heat gun or a hairdryer to warm the adhesive and make it more pliable. This will allow you to carefully pry off the sections without damaging them.

Storing and Disposing of the Glass

Once you've removed all the glass, wrap each section in a protective material like bubble wrap or a blanket to prevent further damage or injury. If you're planning on reinstalling the dome, be sure to label each section to ensure they go back in the correct order.

AD

As for disposal, check with your local waste management department to see if they accept used glass. If not, you may need to take the glass to a recycling center that accepts it. Always ensure the glass is thoroughly wrapped and secured before transporting it to prevent accidents.

Installing Your New Glass Dome

With the old dome removed, it's time to install your new one. If you've bought a replacement from Whitestone or another supplier, it should come with detailed instructions. In general, the process involves securing the new dome in place using screws or bolts, ensuring it's level and properly torqued to prevent leakage or damage.

Measuring and Cutting Glass Domes

If you've chosen to have your glass dome custom-made or cut to size, you'll need to measure and mark the new glass accordingly. Use a measuring tape or ruler to mark the new dimensions directly on the glass, ensuring your lines are straight and accurate. Once you've marked your cutting lines, you can follow the same process as before to score and break the glass.

Don't forget to account for any complicating factors, like curves or offsets, when measuring and cutting. If you're unsure about how to handle these, it's best to consult with a professional glazier or glass supplier.

Installing Custom-Cut Glass Domes

Once you've cut your glass to size, the installation process is relatively straightforward. Secure the new dome in place using screws or bolts, ensuring it's level and properly torqued. If you're using adhesive to install the dome, apply it evenly and use clamps or weights to keep the glass in place while it dries. Always follow the manufacturer's instructions for the specific adhesive you're using.

With your new glass dome installed, you're ready to enjoy your Whitestone infrared sauna or steam shower again. But remember, while glass domes are designed to withstand substantial heat and humidity, they're not indestructible. Regular cleaning and maintenance will help ensure your dome lasts for years to come.

Finally, don't forget to appreciate the reward of a job well done. Removing and replacing a glass dome can be a satisfying project, and the sense of accomplishment you feel at the end is well worth the time and effort you've put in. So, go ahead, kick back, and enjoy your sauna or shower with your new, pristine glass dome. Just remember to keep an eye on it to ensure it stays that way!

AD