how to remove whisk from kitchenaid mixer

Easy Steps to Remove Whisk from KitchenAid Mixer

By Nicole Rodriguez
AD

Ever found yourself mid-recipe, kneading dough for that perfect loaf, when suddenly your trusty KitchenAid mixer begins to emit a peculiar whirring noise? The culprit? A pesky whisk or dough hook that's found its way into the mixer's gearbox. Fear not, for this doesn't mean you'll have to part ways with your trusty mixer or shell out for a costly repair. With a few simple tools and some elbow grease, you can remove the whisk and get your mixer purring like new again. Let's dive into a step-by-step guide on how to safely remove a whisk from your KitchenAid mixer.

Before we proceed, it's crucial to ensure your mixer is unplugged and that the beaters and guard are removed to prevent any mishaps. Always prioritize safety when dealing with potential mechanical issues.

Diagnosing the Problem

Understanding what's causing the unusual noise is the first step in resolving the issue. A whisk or dough hook that's gotten caught in the gearbox is often the culprit behind a mixer's persistent whirring or grinding noises. The next step is to determine which part has found its way into the gearbox.

AD
three pictures showing how to use a whisk
three pictures showing how to use a whisk
KitchenAid Mixer Maintenance & Care Tips You Need to Know
KitchenAid Mixer Maintenance & Care Tips You Need to Know
KitchenAid Mixer Loose Pin Fix
KitchenAid Mixer Loose Pin Fix

Inspect the mixer's interior, paying close attention to the gears and the opening where the beaters connect. Look for any signs of the whisk or dough hook. If you spot it, you've confirmed the issue. If not, don't worry; the following steps will help you troubleshoot further.

Removing the Pinion Gear

The pinion gear is the small, circular gear that connects to the mixer's beater shaft. If the whisk or dough hook is stuck here, you'll need to remove the pinion gear to access it. Use a Philips-head screwdriver to remove the screw covering the gear housing. Next, use a flathead screwdriver to carefully pry the gear housing off, taking care not to damage it.

a hand holding a metal wire whisk
a hand holding a metal wire whisk
whisk wiper being used to make whipped cream
whisk wiper being used to make whipped cream

Once the housing is off, you should be able to see the pinion gear. If the whisk or dough hook is visible, you can try using needle-nose pliers to carefully grasp it and pull it out. If it's not visible, you'll need to remove the pinion gear itself.

Removing the Pinion Gear from the Shaft

Removing the pinion gear might seem daunting, but with the right tools, it's quite manageable. You'll need a pinion gear puller, which can be found at most hardware stores or online. Follow the instructions provided with the puller, which typically involve placing it around the gear and turning the handle to slowly pull it off the shaft.

AD

Once the pinion gear is off, you should be able to see the whisk or dough hook. Use needle-nose pliers to carefully remove it. If the whisk or hook is stuck, you may need to use a little force, but do so carefully to avoid damaging any components.

Checking for Further Damage

With the whisk or dough hook removed, it's essential to inspect the gearbox and mixer mechanism for any signs of damage. Look for bent or broken parts, as these will need to be replaced before using your mixer again.

If everything appears to be in order, you can proceed to reassemble your mixer. Before doing so, ensure that the interior is clean and free of any debris that may have entered during the disassembly process.

AD

Reinstalling the Pinion Gear

Reinstalling the pinion gear is a straightforward process. Simply place the gear back onto the shaft, making sure it's properly aligned. Use the pinion gear puller in reverse to push the gear onto the shaft. Make sure it's securely in place before moving on to the next step.

With the pinion gear reinstalled, you can replace the gear housing. Make sure to secure the screw covering the housing, but don't overtighten it, as this could strip the screw or damage the gear housing.

Reattaching the Guard

With the gearbox reassembled, you can reattach the guard. Line up the guard with the mixer's base, making sure it's properly aligned. Push it onto the base and secure it in place. Ensure it's firmly attached but not overtightened.

AD

Now that your mixer is reassembled, it's time to give it a test run. Plug it in and turn it on, starting at the lowest speed. As you increase the speed, listen for any unusual noises. If your mixer is running smoothly and quietly, you've successfully removed the whisk and restored your KitchenAid to its former glory!

Remember, prevention is always better than cure. To keep your mixer in top condition, always remove the beaters when changing attachments, and store your mixer with the head in the up position to prevent any parts from falling into the gearbox. With proper care, your KitchenAid mixer should serve you faithfully for years to come.

AD