how to remove whirlpool microwave

How to Remove Whirlpool Microwave

By Michael Lopez
AD

Are you wondering how to safely and efficiently remove your Whirlpool microwave? Installing or uninstalling any appliance can be a daunting task, but with the right guidance, you can confidently and securely remove your Whirlpool microwave. This guide will walk you through the process, step by step.

Before you begin, ensure that you have all the necessary tools. You will need a screwdriver (usually a Phillips head), adjustable wrenches, and possibly a putty knife or a flathead screwdriver for prying. Additionally, make sure the microwave is turned off and unplugged from the power source to avoid any electrical hazards.

Preparation and Precautions

While removing your Whirlpool microwave might seem straightforward, it's essential to take necessary precautions and prepare your workspace accordingly.

AD
How To Reset Whirlpool Microwave - Ready To DIY
How To Reset Whirlpool Microwave - Ready To DIY
How to clean your microwave
How to clean your microwave
Client Challenge
Client Challenge

Start by placing a towel or a blanket on the countertop where the microwave will rest during unplugging and unscrewing. This will protect the surface from scratches or damages. Additionally, ensure that there's enough space around the microwave for you to move freely during the uninstallation process.

Unplugging and Supporting the Microwave

Safety should always be your top priority when dealing with electrical appliances. Before you begin, unplug the microwave from the power source.

Whirlpool Microwave Repair – How to replace the Glass Cooking Tray
Whirlpool Microwave Repair – How to replace the Glass Cooking Tray
How to Clean and Replace Microwave Filters | Whirlpool
How to Clean and Replace Microwave Filters | Whirlpool

To do this, locate the power cord at the rear of the microwave. Carefully disconnect it from the wall outlet. If the cord is hard to reach, you might need to tilt the microwave slightly to access it. Once disconnected, do not attempt to lift the microwave yet; support it from the bottom to prevent any unnecessary stress on the power cord or wall outlet.

Removing the Cabinet Screws

Now that you've safely unplugged the microwave, it's time to remove the cabinet screws. These screws secure the microwave to its cabinet or wall bracket.

AD

Grab your screwdriver and locate the screws along the bottom and side edges of the microwave. They are usually Phillips-head screws. Using your screwdriver, carefully remove these screws, ensuring none of them fall into the cabinet. If they're tight, you might need to use a wrench to provide extra leverage. Place these screws in a safe spot to prevent misplacing them.

Disconnecting the Microwave from Cabinet or Countertop

With the cabinet screws removed, it's time to disconnect the microwave from the cabinet or countertop. This process might vary slightly depending on your kitchen setup.

In most cases, you can simply slide the microwave off the mounting rail or bracket. Some models might have indicators on the casing to help you align the microwave properly. If your microwave is mounted using brackets or straps, you'll need to unthread these and remove them completely.

AD

Removing the Microwave from the Countertop

Now that the microwave is unsecured, carefully pull it out slightly from the countertop. Be cautious not to damage the countertop, and make sure you have a good grip on the microwave to prevent it from falling.

If the microwave is positioned above the stove or oven, you might need to tilt it slightly to clear the range hood or any other obstacle. Be sure not to let the microwave dangle when tilting it, as this can cause strain on the power cord.

Disconnecting the Power Cord

With the microwave now out of the cabinet or countertop, it's time to disconnect the power cord from the power cord terminal block. This is usually located at the rear of the microwave.

AD

Using a putty knife or a flathead screwdriver, carefully pry open the power cord cover. You'll find two screws that secure the power cord to the terminal block. Use your screwdriver to remove these screws. Now, the power cord should be free from the terminal block. If it's still connected, you might need to slide it out using a wire stripper or a set of needle-nose pliers.

Cleaning and Preparing the Space

With the Whirlpool microwave now removed, it's time to clean up the area and prepare it for your new appliance, or for future use. This step is especially important if your microwave was mounted over the stove or range.

Wipe down the area where the microwave was installed with a damp cloth to remove any grease or dirt buildup. If the space is especially dirty or greasy, you may need to use a cleaner suitable for your countertop material. Allow the area to dry completely before proceeding.

Storing Your Old Microwave

If you're keeping your old Whirlpool microwave for any reason, ensure it's stored properly to prevent damage. Place the microwave on a flat, stable surface, away from direct sunlight and heat sources. If possible, lay the microwave on its back to protect the door from damage. If you're storing the microwave for a long period, consider covering it with a sheet or a blanket to prevent dust buildup.

Congratulations! You've successfully removed your Whirlpool microwave. Before you move on to installing a new one or repurposing the space, take a moment to admire your work. Now, consider how you might use this newly freed space in your kitchen – perhaps for a bumper crop of fresh herbs, or as a new command center for your family's schedule and mail.

AD