how to remove water saver from shower head

How to Remove Water Saver from Shower Head

By Joseph Moore
AD

If you've ever noticed a decrease in water pressure from your showerhead, it might be time to remove your water-saving device. While these flow restrictors are great for conserving water, they can sometimes hinder your shower experience. Removing them can be a simple task, but it's important to do it right to avoid damaging your showerhead. Let's guide you through the process step by step.

Before you begin, gather your tools. You'll need a pair of pliers, an Allen wrench (usually included with your showerhead), and some penetrating oil like WD-40. Also, have a towel or rag ready to clean up any water drops. Now, let's dive into the process.

Understanding Your Showerhead

The first step is understanding the type of showerhead you have. Most modern showerheads can be easily disassembled with little more thanpliers or an Allen wrench. However, some may require additional tools or professional assistance to remove.

AD
How To Remove Flow Restrictor From Bathroom Faucet – Storables
How To Remove Flow Restrictor From Bathroom Faucet – Storables
How to Remove Water Restrictor From Moen Shower Head in 5 Minutes
How to Remove Water Restrictor From Moen Shower Head in 5 Minutes
how to remove the water saver from a shower head
how to remove the water saver from a shower head

Older showerheads or those with built-in water-saving devices may be more difficult to remove. Always check your user manual or contact the manufacturer if you're unsure about your showerhead's removal process.

Preparing Your Showerhead for Removal

Before you start, ensure the water supply to your shower is turned off. This could be via a valve near your shower or at your home's main water supply. Once the water is off, it's a good idea to let any residual water drain from the showerhead.

How to Remove the Water Saver from a Shower Head
How to Remove the Water Saver from a Shower Head
Removing the flow restrictor on a WaterPik (water saver)
Removing the flow restrictor on a WaterPik (water saver)

Now, apply a small amount of penetrating oil to the threads of the showerhead. This can help loosen any rust or buildup, making removal easier. Let the oil sit for a few minutes while you prepare your tools.

Removing the Showerhead

With your tools ready, it's time to start removing the showerhead. If your showerhead has an Allen wrench slot, insert the wrench and gently turn counterclockwise. If it's tight, you may need to use some force, but be careful not to stripped the slot.

AD

If your showerhead has no slot, you'll likely need to unscrew it by hand or, in some cases, using pliers. The same principle applies: turn counterclockwise gently but firmly. If it's too tight, apply a bit more penetrating oil and let it sit before trying again.

Removing the Water Saver

Once you've successfully removed the showerhead, you should see a metal disk or insert blocking the water flow. This is your water-saving device, also known as an aerator or flow restrictor. The exact method of removal will depend on the type of restrictor you have.

Some can be unscrewed like the showerhead itself, while others may require pinching, twisting, or even cutting. Always consult your user manual if available. If not, a quick online search may provide specific instructions for your particular model.

AD

Removing a Screw-On Flow Restrictor

If your flow restrictor screws onto the showerhead, turn it counterclockwise to remove it. It's usually easy to distinguish from the main showerhead due to its smaller size. Once unscrewed, simply pull it out.

If it's tough to remove, you can use pliers for extra grip, or apply some penetrating oil to help loosen it. If it breaks off or becomes lodged, you may need to seek professional help.

Removing a Press-Fit or Snap-In Flow Restrictor

Some flow restrictors are pressed or snapped into place. These can be trickier to remove. You might need to use pliers or a snap ring pliers to grip and pull the restrictor out.

AD

Apply some oil to the threads or edges of the restrictor to help it slide out. If it's still stuck, you might need to use a small screwdriver or pick to gently pry it out. Be careful not to damage the restrictor or the showerhead during this process.

Cleaning and Reinstalling Your Showerhead

With the flow restrictor removed, your showerhead should now spraying more water. Before reinstalling, clean your showerhead to remove any buildup or rust. This will help maintain your showerhead's longevity and prevent future water flow issues.

To reinstall, apply a small amount of thread seal tape or pipe joint compound to the threads of your showerhead. This helps create a watertight seal, preventing leaks. Screw the showerhead back onto the shower arm, turning clockwise until it's snug but not overly tightened.

Remember to turn the water supply back on. Start with a slow flow to avoid any water pressure issues. If your showerhead was leaking before, but now sprays perfectly, you're done! If not, you may need to re-evaluate your process or consult a professional.

Finally, consider that while removing your water-saving device can improve your shower experience, it's also important to be mindful of water usage. The Environmental Protection Agency (EPA) estimates that showerheads account for nearly 17% of residential water use. So, while you enjoy your stronger shower, remember to turn it off when not in use and consider installing a low-flow showerhead in the future.

AD