how to remove vivint doorbell camera from wall

Step-by-Step: How to Remove Vivint Doorbell Camera from Wall

By David Brown
AD

If you're a Vivint customer seeking to replace or remove your Vivint Doorbell Camera, you've come to the right place. This comprehensive guide will walk you through the process, ensuring everyone can understand and follow along. Remember to handle the camera with care to avoid damaging it or injuring yourself.

Before you begin, ensure you have the following tools and materials: a small flathead screwdriver, a ladder (if your doorbell is high up), and a helper, if possible. Disconnecting the camera incorrectly could cause damage or void your warranty, so it's crucial to follow the steps precisely.

Preparation and Safety Precautions

Safety should always be your top priority when dealing with electrical devices.

AD
How To Remove Wyze Doorbell – Storables
How To Remove Wyze Doorbell – Storables
How to install doorbell camera - The Tech Edvocate
How to install doorbell camera - The Tech Edvocate
How To Remove Ring Doorbell Battery – Storables
How To Remove Ring Doorbell Battery – Storables

First, turn off the power to the doorbell camera at your home's main electrical panel. Use a flashlight to ensure the power is indeed off by attempting to turn on the doorbell using the indoor control panel. If power is off, the indoor panel won't activate. This step is crucial to prevent accidental electrocution.

Gather Your Tools

Assemble all the necessary tools before you start. Apart from the screwdriver and ladder, if required, make sure you have a stable surface to place your tools and the removed camera.

How To Remove Blink Doorbell
How To Remove Blink Doorbell
How to Fix a Doorbell? - Easy Steps Guide to Broken Doorbell
How to Fix a Doorbell? - Easy Steps Guide to Broken Doorbell

Ensure your work area is well-lit and free from obstacles. If you need a ladder, secure it firmly against the wall to prevent wobbling.

Understand Your Doorbell Camera Model

Vivint offers several doorbell camera models. Although the removal process is similar, there may be slight differences depending on your specific model. Familiarizing yourself with the installation instructions or your model's user manual can provide valuable insights.

AD

For example, if you have a Vivint SkyControl panel, it may have a dedicated doorbell button that needs to be disconnected. This step might not be necessary if you have an older system without a dedicated doorbell button.

Removing the Vivint Doorbell Camera

Now that you've taken the necessary safety precautions and gathered your tools, it's time to remove the doorbell camera.

Start by removing the faceplate. Most Vivint doorbell cameras have a faceplate that snaps onto the camera. Gently pry it off using your fingers or a flathead screwdriver if needed. Be careful not to damage the faceplate or camera.

AD

Disconnect the Wires

The doorbell camera is secured to the wall using screws. Before removing these screws, carefully observe the wires connected to the back of the camera.

Vivint doorbell cameras usually have two wires: a black wire (negative) and a white wire (positive). Using your small flathead screwdriver, carefully unscrew the wire connectors from the camera and pull the wires out. Be gentle to avoid breaking any internal components.

Remove the Mounting Screws

With the wires disconnected, unscrew the mounting screws securing the camera to the wall. These screws might be hidden under the faceplate, so ensure you've removed the faceplate first.

AD

Once the screws are removed, gently pull the camera away from the wall. If it feels stuck, it might still be connected to the chime; in this case, see the next section.

Disconnecting the Camera from the Chime

If your doorbell camera is still connected to the chime, you'll need to access the chime box to disconnect it.

Your chime box is usually located in a central location, such as a hallway or a utility closet. It may be mounted on the wall or placed on a shelf. Once you've located the chime box, open it carefully.

Trace the Wires to the Chime

Inside the chime box, you'll find several wires. Locate the wires connected to your doorbell camera. These are usually the same color as the wires you disconnected from the camera.

Carefully disconnect these wires from the chime. If you're unsure about any of the connections, consult your chime box documentation or seek professional assistance.

Test the Disconnection

After disconnecting the wires, test the doorbell camera's removal by attempting to press the doorbell button or trying to ring the doorbell using your Vivint app or SkyControl panel. If the chime doesn't sound, you've successfully disconnected the camera.

Now, you can dispose of the camera responsibly or store it for future use. Always remember to recycle electronic devices according to your local regulations.

With your Vivint Doorbell Camera removed, you're free to install a new one or switch to a different doorbell system. Always ensure you follow the installation instructions for any new device to maintain optimal performance and safety. If you have any questions or concerns during the process, don't hesitate to reach out to Vivint's customer support or a professional technician.

AD