Removing USSD Security Tags: A Step-by-Step Guide
Do you often find yourself buying clothing or accessories only to discover invisible USSi (Electronic Article Surveillance, or EAS) security tags still attached? Removing these subtle but pesky tags the right way can save you from damage and potential alarm triggers. Here's how to remove USSi security tags efficiently and safely.
Before we dive into the methods, it's crucial to understand that USSi tags use radio frequency (RF) or acousto-magnetic (AM) technology. Most retailers use RF tags, which emit a signal when passed through an antenna at the exit. AM tags, on the other hand, respond to a specific frequency and can be deactivated using a magnetic field. Understanding the tag's type helps in choosing the best removal method.
Manual USSi Security Tag Removal
The most straightforward method to remove a USSi security tag is manually by cutting or shredding it. This method is suitable for RF tags but might not work as effectively on AM tags.
DON'T attempt to remove the tag with scissors or tear it off. Both methods can damage the fabric or cause the tag's alarm to go off.
Using Tag Removers
Special USSi tag removers are designed to disable RF tags safely. These removers mimic the frequency emitted by store deactivation equipment. Simply press the remover against the tag, and it should deactivate the alarm.
While these removers are effective, they are costly and might not be practical for everyone. Moreover, they don't work on AM tags.
Cutting or Shredding Tags
If you don't have a tag remover, you can use a zip tie or keyring tool to cut or shred the tag. First, pierce the tag with the tool, and then gently twist and pull to cut or shred it. This method works well on RF tags but can be messy.
Be cautious while using this method. Shredded tags can cause skin irritation or even enter your bloodstream if accidentally inserted into a wound. Always wear gloves and clean the area thoroughly afterward.
Removing AM Tags
Acousto-magnetic tags are more challenging to remove at home. They respond to a specific frequency, usually between 58 kHz and 150 kHz. To remove these tags, you'll need a magnetic field stronger than the one used in the exit gates.
Using Strong Magnets
Powerful magnets, like Neodymium magnets, can create a powerful enough magnetic field to deactivate AM tags. Stick the magnet to the tag for about 30-60 seconds, then remove it. The tag should now be deactivated.
While this method works, it's not foolproof. Some AM tags might be deactivated only partially, or not at all. It's always a good idea to check the tagged item at the store's exit to ensure the tag is completely deactivated.
Always remember to remove USSi security tags from your items at home to avoid embarrassment and potential fines at store exits. If in doubt, ask store staff for assistance in removing tags before leaving the store. Stay safe and happy shopping!