how to remove tub handles

How to Easily Remove Tub Handles

By Michael Johnson
AD

Tub handles, while functional, can sometimes become an eyesore or pose accessibility issues. If you're looking to revamp your bathroom or enhance accessibility, removing tub handles is a straightforward DIY project that can make a significant impact. This comprehensive guide will walk you through the process, ensuring your tub is handle-free and safe to use.

Before we delve into the process, it's crucial to understand that tub handles differ in their removal process depending on their type. In this guide, we'll cover the most common types: deck-mounted and body-mounted handles.

Gathering Your Tools and Materials

Before you begin, ensure you have the right tools and materials.

AD
two pictures of the same person's hand holding a shower faucet in different positions
two pictures of the same person's hand holding a shower faucet in different positions
Video (longer version): Replace a Bathtub Faucet Handle
Video (longer version): Replace a Bathtub Faucet Handle
How to replace a broken tub spout. #bathtub #tubspout #diy #plumbing #plumber #handyman #bathroom
How to replace a broken tub spout. #bathtub #tubspout #diy #plumbing #plumber #handyman #bathroom

For both types of handles, you'll need:

  • A screwdriver (Phillips or flathead, depending on your handle's screw type)
  • Needle-nose pliers
  • Tape measure
  • marker
  • Safety glasses

Deck-Mounted Handles

Deck-mounted handles are attached to the rim of your tub. You'll also need:

How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove Your Delta Shower Handle: A Complete Guide
How to Replace a Bathtub Faucet
How to Replace a Bathtub Faucet
  • Tapping compound (if using a tap and die set)
  • Tap and die set
  • Adjustable wrench

For body-mounted handles, which are screwed directly into the tub, you'll need:

  • registering tape
  • Tissue paper

Preparation

Before you start, take some preparatory steps to ensure a smooth process and minimal mess:

AD

1. **Measure and mark**: Use your tape measure and marker to identify the handle's location.

2. **Turn off water supply**: Locate and turn off your tub's water supply valve to prevent any water leaks or accidents.

3. **Drain**: Open the tub faucet and let any water remaining in the tub drain out.

AD

4. **Protectyour tub**: To prevent scratches or damage, place a towel or soft cloth over the tub where you'll be working.

Removing Deck-Mounted Handles

Deck-mounted handles are typically secured with screws, but sometimes nuts and bolts are used. Follow these steps to remove them:

1. **Remove the screw cap**: If your handle has a decorative screw cap, use your screwdriver to remove it.

AD

2. **Remove the screw**: Using your screwdriver, turn the screw counterclockwise to remove it. If it's stuck, use penetrating oil to loosen it.

3. **Remove the handle**: With the screw removed, gently pull the handle out and discard it.

4. **Fill the hole**: If you're not replacing the handle, you may want to fill the hole. Use a tap and die set (start with the smallest tap and gradually move up) to enlarge the hole, then fill it with tapping compound and a wooden plug.

Removing Body-Mounted Handles

Body-mounted handles are screwed directly into the tub. Here's how to remove them:

1. **Remove the screw cap**: Similar to deck-mounted handles, use your screwdriver to remove the screw cap.

2. **Mark and protect the area**: Use registering tape and a marker to denote where the hole starts. Apply tissue paper around the hole to protect the tub from damage.

3. **Remove the screw**: Use your screwdriver to turn the screw counterclockwise and remove it. If it's stuck, use penetrating oil to loosen it.

4. **Remove the handle**: With the screw removed, gently pull the handle out and discard it.

Final Touches and Safety Checks

Once you've removed your tub handle, there are a few final steps to complete the process:

1. **Clean the area**: Use a soft cloth to wipe away any tapping compound residue or dust.

2. **Check for leaks**: Turn on the water supply and fill your tub. Check for any leaks around the old handle's location.

3. **Reassess your bathroom's accessibility**: With the handle removed, ensure your tub is still safe and accessible for everyone who uses it. If you find any issues, consider installing a grab bar or non-slip mat for safety.

Removing tub handles is a rewarding DIY project that can significantly transform your bathroom's look and feel. By following this comprehensive guide, you're well on your way to a handle-free tub that's safer and more appealing. Now that you've completed this project, consider what other bathroom updates you could tackle next to continue enhancing your space!

AD