how to remove trailer light bulb

How to Replace Trailer Light Bulbs

By Michael Thompson
AD

Ever found yourself on a long journey only to realize your trailer lights aren't working? It's a safety concern and a frustrating issue. But don't worry, replacing a trailer light bulb is a simple task that anyone can do. Let's guide you through the process.

First, let's understand the basics. Trailer lights are indicator and running lights that help other drivers see your trailer. They are typically located on the sides, rear, and license plate area. If one of these bulbs burns out, we'll show you how to replace it quickly and safely.

Gather Your Tools and Materials

Before you start, ensure you have the right tools and materials. You'll need gloves to protect your hands, a new bulb that matches your trailer's existing bulb type, a socket wrench, and a ladder or step stool for hard-to-reach lights.

AD
How to Fix Lights on a Trailer
How to Fix Lights on a Trailer
How to Replace a Trailer Light
How to Replace a Trailer Light
Tech Tip: Cleaning a Corroded Trailer Light Connector
Tech Tip: Cleaning a Corroded Trailer Light Connector

Always ensure the trailer is parked on a level surface and the brake is engaged. Safety first!

Identify the Bulb Type and Purchase a Replacement

Trailer bulbs come in various types, including W5W, W16W, and BA9S. Before you buy, identify the bulb type by looking at the blown bulb or checking your owner's manual. Buying the wrong bulb can cause electrical issues or not fit properly.

Use A Potato To Remove Your Broken Light Bulb
Use A Potato To Remove Your Broken Light Bulb
How to Remove Turn Signal Bulb from Socket | 7 Easy Guide
How to Remove Turn Signal Bulb from Socket | 7 Easy Guide

You can purchase replacement bulbs at auto parts stores, trailer specialty shops, or online. Always choose a high-quality bulb from a reputable brand to ensure longevity and performance.

Accessing the Bulb Socket

Once you have your replacement bulb, it's time to access the bulb socket. The process varies depending on the location and type of light. Let's go through the common ones.

AD

Rear and Side lights

Most trailers have lights mounted in sealed bezels. To access the bulb, you'll need to remove the lens or bezel. Using a socket wrench, carefully unscrew the bezel counterclockwise. It might take some force, as they can get stuck due to age or weathering.

If your trailer lights have a snap-fit lens, you might need to use a flathead screwdriver to pry it off gently. Once the bezel or lens is removed, you'll see the bulb socket. Be careful not to touch the socket with your fingers as the oil from your hands can cause corrosion.

License Plate Lights

License plate lights are often located in a different compartment than the other lights. The compartment is usually found behind the license plate or under the trailer's bed. You might need to remove the license plate or lift the bed to access it.

AD

Before you proceed, ensure the compartment is clean and dry to prevent water or debris from entering the electrical system when you reinstall the license plate.

Removing the Old Bulb and Installing the New One

Now that you've accessed the bulb socket, it's time to remove the old bulb and install the new one. The process is generally the same for all bulb types but differs slightly for some.

Standard Bulbs (BA9S, W5W, etc.)

Unscrew the old bulb counterclockwise and gently pull it out. Be very careful not to break it or touch the glass part with your fingers. Insert the new bulb by matching the base to the socket's karma hole and gently screw it back into place clockwise. Do not overtighten.

AD

Once the new bulb is securely in place, reattach the bezel or lens by hand. If you're using a socket wrench, do not overtighten. When you're done, turn on your trailer's lights to ensure the new bulb is working correctly.

LED Bulbs

LED bulbs are a bit different. First, remove the old LED bulb by unscrewing or unplugging it from the electrical connector. Be careful not to damage the connector.

Insert the new LED bulb, ensuring it's facing the right direction and the electrical contacts are secure. Reinstall the bezel or lens, ensuring it's properly seated. Test the new bulb by turning on your trailer's lights.

Always test your new bulb immediately after installation. If it doesn't work, double-check that you've installed it correctly and that the circuit is receiving power from the tow vehicle.

Remember, regular maintenance can extend the life of your trailer lights. Check them before every trip, and clean the lenses and bezels to ensure they're clear and readable. Safe travels!

AD