Easy Steps to Remove Toilet Roll Holder in Seconds
Tired of an outdated toilet roll holder? Looking to give your bathroom a fresh new look? Don't let the process intimidate you; removing a toilet roll holder is easier than you think. The key is to know a bit about your specific model and use the correct tools. Let's dive into how to remove toilet roll holder from common types, and give your bathroom update a successful start.
Before you begin, make sure to unroll any toilet paper and place it away from the area to keep it clean and dust-free. Also, gather your tools – they might include a screwdriver, pliers, or a hammer, depending on the holder type.
Unscrewing Toilet Roll Holder
The most common types of toilet roll holders are screwed onto the wall or the side of the toilet. If your holder is one of these, you're in luck, for it's the easiest to remove.
Wall-Mounted Toilet Roll Holder
If your holder is mounted on the wall, start by locating the screws that secure it. They might be hidden under decorative covers or inside the holder's arms. Use a screwdriver – usually, a Phillips head or a flathead will work – to remove the screws by turning them counterclockwise.
Once the screws are out, gently pull the holder away from the wall. If it's still stuck, you might need to use a hammer to tap it lightly and loosen its grip. Be careful not to damage the wall or the holder.
Toilet-Side Toilet Roll Holder
Removing a toilet-side holder follows the same steps, but you'll need to access screws often hidden behind the holder's arms or inside the toilet's tank. You might need to remove the tank lid and lift the float to access the screws completely.
Again, use a screwdriver to remove the screws, and once they're out, gently pull the holder off the toilet. If it's stuck, use a hammer as mentioned above.
Unfastening Exposed Pipe Toilet Roll Holder
Some toilet roll holders are fastened to exposed plumbing pipes. Removing these usually requires a more careful touch to prevent leaks.
Loosen the Clamp
Use an adjustable wrench or pliers to turn the Pipe's connecting nut counterclockwise. Be careful not to overtighten, as it can cause leaks. Once loosened, carefully unscrew the nut and remove the holder.
If the holder doesn't come off easily, you might need to use a penetrating oil like WD-40 on the threads to help break the seal. Allow the oil to soak for a few minutes before trying again.
Replace the Nut
Once the holder is off, replace the nut on the pipe to prevent leaks. Tighten it gently with your hand – do not overtighten. Call a plumber immediately if you notice any leaks.
Now that your toilet roll holder is removed, you're one step closer to that bathroom update. Don't forget to clean the area before installing your new holder. Happy upgrading!