how to remove the stand from an imac

Easy: How to Remove Stand from MacBook

By John Thompson
AD

Is your iMac stand blocking your view or taking up too much space on your desk? Removing it can give you a better viewing angle and more room for other items. Here's a step-by-step guide on how to safely remove the stand from your iMac. Let's dive in.

Before we start, ensure you have a suitable workspace with enough lighting. Also, have a friend help you if possible, as moving the iMac can be tricky. Always prioritize safety to prevent any accidents or damages.

Preparations Before Removing the Stand

Before you start removing the stand, there are a few preparations you should consider.

AD
iMac Standfuß entfernen
iMac Standfuß entfernen
Removing and Re-Installing the Apple Cinema Display/iMac Stand/Vesa Mount
Removing and Re-Installing the Apple Cinema Display/iMac Stand/Vesa Mount
How to Remove the Stand from a 2013 iMac - DeviceMAG
How to Remove the Stand from a 2013 iMac - DeviceMAG

First, ensure your iMac is turned off and disconnected from the power source. This step is crucial to prevent any electrical hazards. Next, disconnect all cables and peripherals. This includes USB, HDMI, Thunderbolt, and Ethernet cables, as well as your keyboard, mouse, or trackpad.

Gather Your Tools

To remove the iMac stand, you'll need a few simple tools. Here's a list:

How To Remove Front Display Glass on iMac 27 inch | iMac 27 late 2014 Front Display Replacement
How To Remove Front Display Glass on iMac 27 inch | iMac 27 late 2014 Front Display Replacement
a sign that says ventt holes and an arrow pointing to the left on a computer screen
a sign that says ventt holes and an arrow pointing to the left on a computer screen
  • Twelve 5mm Pentalobe ™ screws (included with your iMac)
  • Tweezers or a small magnetic tool to pick up screws
  • Two 5mm nut drivers (for later reassembly)

Accessing the Screws

To access the screws, tilt your iMac to a horizontal position. The stand will be facing down. Look for the twelve 5mm screws along the bottom edges of the iMac. These screws hold the stand in place. Using a 5mm nut driver, remove these screws carefully.

NOTE: It's essential to keep track of these tiny screws to prevent losing any. Using a magnetic tool or tweezers can help in this regard.

AD

Removing the Stand Safely

With the screws removed, it's time to detach the stand from your iMac.

Start by lifting the iMac gently. The stand should come off easily, as it's secured only by the screws. If it doesn't come off immediately, it might still be stuck to the screen slightly due to residue from manufacturing or use. Gently shake it or use a plastic opening tool to loosen and remove the stand.

Cleaning the Bottom Edge

After removing the stand, you might notice some residue on the bottom edge of your iMac. This is normal and can be cleaned using isopropyl alcohol (70% concentration) and a lint-free cloth or cotton swab. Apply a small amount of alcohol to the cloth, then gently wipe the edge until it's clean.

AD

Reassembling the Stand (Optional)

If you decide to reuse the stand in the future, you can reassemble it now. Alignment is critical, so be sure to match the stand with the screw holes on the iMac. Once aligned, replace the twelve screws using the 5mm nut driver. Be careful not to overtighten the screws.

Congratulations, you've successfully removed the stand from your iMac! If at any point you feel unsure or uncomfortable with the process, don't hesitate to seek professional help. Enjoy your newly freed-up desk space!

AD