how to remove the impeller from a hayward pool pump

Step-by-Step: Removing Impeller from Hayward Pool Pump

By Nicole Garcia
AD

So, you've decided it's time to clean or replace the impeller in your Hayward pool pump? A well-maintained pump is essential for a healthy pool, and understanding how to remove the impeller is a crucial step in this process. Don't worry, with the right tools and a bit of patience, you can do this. Let's dive into the step-by-step guide.

Before we begin, ensure you've turned off and unplugged your pool pump to ensure safety. Also, gather your tools: a socket wrench, a flathead screwdriver, needle-nose pliers, and a new impeller if you're replacing it.

Accessing the Impeller

The first hurdle is accessing the impeller. Don't be daunted, it's simpler than it seems.

AD
How To Clean Out a Pool Pump Impeller
How To Clean Out a Pool Pump Impeller
How To Remove Stubborn Pool Pump Impellers
How To Remove Stubborn Pool Pump Impellers
Hayward Super Pump Impeller Removal - Poolandspa.TV Swimming Pool And Spa Pump Repair Series
Hayward Super Pump Impeller Removal - Poolandspa.TV Swimming Pool And Spa Pump Repair Series

Start by removing the four screws securing the lid of the pump strainer basket. This will give you a clear view of the pump's impeller.

Draining the Pump

Before you proceed, you need to drain the pump to prevent any water from blocking your view or causing a mess.

How To Replace A Pool Pump Impeller
How To Replace A Pool Pump Impeller
Clogged Pool Pump Impeller
Clogged Pool Pump Impeller

Locate the union nut connecting the pump to the elbow, and use your socket wrench to loosen and remove it. Allow the water to drain completely.

Removing the Shaft Seal

Now, it's time to remove the shaft seal. This might seem challenging, but it's crucial to expose the impeller.

AD

Use your flathead screwdriver to remove the clip securing the shaft seal. Once removed, use needle-nose pliers to extract the seal itself. Be careful not to damage the seal seat.

Removing the Impeller

Finally, we're at the main event: removing the impeller.

The impeller is secured by a bolt at the center. Use your socket wrench to loosen and remove this bolt.

AD

Unseating the Impeller

Once the bolt is removed, use your screwdriver to carefully pry the impeller off the shaft. It might be tight, so be patient and persistent.

If you're replacing the impeller, ensure the new one is a perfect match for your pump model. Install the new impeller by reversing the steps you've taken to remove the old one.

Reassembling and Testing

Once the new impeller is in place, reinsert the shaft seal, secure it with the clip, and replace the union nut, ensuring it's tight but not overtightened.

AD

Finally, turn your pump back on and test the water flow. If your impeller is installed correctly, your pool pump should be back to its normal, efficient self.

Regular maintenance, including replacing the impeller when necessary, is key to extending the life of your Hayward pool pump. Happy swimming!

AD