how to remove the cover on a ring doorbell

Step-by-Step Guide: How to Remove the Cover on a Ring Doorbell

By Robert Clark
AD

The Ring Doorbell, a sleek innovation in home security, often intrigues users with its intuitive features and modern design. Yet, when it comes to removing its protective cover, many users may find themselves at a loss. Fret not, as this comprehensive guide will walk you through the process in simple, step-by-step instructions. Let's dive right in.

Before we get started, ensure you have a few tools readily available: a flathead screwdriver, a Phillip's head screwdriver, and a steady hand. Also, remember that performing this task may void your warranty, so proceed at your own risk. Now, let's get to business.

Preparation and Initial Removal

The first phase involves preparations and initial removal of the outer casing. Follow these steps carefully:

AD
How To Remove Cover From Ring Doorbell – Storables
How To Remove Cover From Ring Doorbell – Storables
How to Remove a Ring Doorbell Cover
How to Remove a Ring Doorbell Cover
How To Install a Ring Doorbell & Fix a Weak WiFi Signal
How To Install a Ring Doorbell & Fix a Weak WiFi Signal

Begin by locating the small screw on the bottom of the doorbell, right in the middle. Use your Phillip's head screwdriver to undo this screw gently, working in a counterclockwise direction.

Once the screw is completely removed, grasp the bottom edge of the Ring Doorbell with your fingers. Gently pull it towards you while simultaneously lifting upwards. This process should prise the outer casing away from the main unit.

HOW TO REMOVE THE COVER ON A RING DOORBELL 2
HOW TO REMOVE THE COVER ON A RING DOORBELL 2
How to Fix a Doorbell? - Easy Steps Guide to Broken Doorbell
How to Fix a Doorbell? - Easy Steps Guide to Broken Doorbell

Dealing with Sticky Situations

Sometimes, the cover might stick due to dirt, dust, or moisture. Here's how to deal with such situations:

If the cover doesn't budge easily, try applying gentle, steady pressure. Be patient and persistent, but avoid using excessive force to prevent damaging the unit. If you feel resistance, stop, take a deep breath, and try again.

AD

If the cover is still stuck, you might need to use a flathead screwdriver carefully to help pry it open. Insert the screwdriver into the small gap between the cover and the main unit at the bottom. Gently work your way around until the cover comes loose.

Finalizing the Removal

After you've freed the cover from its initial grip, follow through with these final steps:

Slide the cover downwards. The doorbell is designed to enable easy removal, so it should come off smoothly at this stage.

AD

Once the cover is completely removed, you should see the inner contents of the Ring Doorbell. Be careful not to touch or disturb any internal components to avoid accidental damage.

Deep Cleaning and Reassembly

After removing the cover, use this opportunity to conduct a thorough clean. Follow these sub-topics for a sparkling Ring Doorbell:

Cleaning the Cover

To avoid building up of dirt and grime over time, clean the cover gently using a soft cloth or cotton swabs dampened with warm water and a mild detergent.

AD

Ensure not to exert too much pressure while cleaning. Afterward, let it air dry completely before reassembly.

Cleaning the Main Unit

The main unit should be cleaned using a delicate approach to avoid damaging sensitive electronic components:

Use a soft, dry brush to remove any loose dust or dirt. If necessary, use a cotton swab lightly dampened with rubbing alcohol to remove stubborn dirt. Avoid applying excessive liquid, as moisture can cause damage.

Once clean, allow the main unit to air dry for a few minutes before reassembly.

Reassembly

Before reattaching the cover, ensure both the cover and the main unit are completely dry. Any residual moisture could lead to damage over time:

Align the cover with the main unit and gently slide it into place starting from the bottom. Ensure the screw hole lines up correctly.

Reattach the screw using your Phillip's head screwdriver, working in a clockwise direction until it's securely fastened but not overly tight.

Your Ring Doorbell is now ready for use, with a fresh, clean look. Regular cleaning will help maintain its functionality and aesthetic appeal. Happy securing!

AD