how to remove stuck tie rod end

Solve Stuck Tie Rod End: How-To Guide

By Ashley Johnson
AD

Ever had your vehicle refuse to turn, despite trying to manipulate the steering wheel with all your might? It's a scary situation, and it's often due to a stuck tie rod end. Tie rod ends connect the steering system to the wheels, enabling you to maneuver your vehicle. When they stick, they can cause major issues, including loss of control. Here's a comprehensive guide on how to remove a stuck tie rod end, ensuring your safety and vehicle performance.

Before we dive into the process, it's crucial to understand your vehicle's suspension and steering system. Tie rod ends are spherical bearings that allow the tie rod to pivot while absorbing the forces from the steering. The inner tie rod end connects to the steering gear or rack, while the outer one attaches to the steering arm on the wheel. Now, let's tackle removing a stuck outer tie rod end.

Preparing to Remove the Stuck Tie Rod End

Before starting, gather your tools: a jack, jack stands, wheel wedges, a breaker bar, sockets, a wrench, and a penetrating lubricant like WD-40. Also, ensure you work in a well-ventilated area, as the steering components may release non-toxic dust when loosened.

AD
HOW TO REMOVE A FROZEN STUCK BOLT on a TIE ROD END with a torch!
HOW TO REMOVE A FROZEN STUCK BOLT on a TIE ROD END with a torch!
Inner Tie Rod Quick Fix: Cutting Out the Old to Save Time!
Inner Tie Rod Quick Fix: Cutting Out the Old to Save Time!
the rear end of a vehicle with three green arrows pointing to it's brake
the rear end of a vehicle with three green arrows pointing to it's brake

Safety first! Park your vehicle on a level surface, apply the parking brake, and block the opposite wheel with a wheel wedge. After raising the stuck wheel using a jack, securely support the vehicle with jack stands. Now, remove the affected wheel for better access.

Accessing the Tie Rod End

Locate the tie rod end nut and castle nut, usually secured with a cotter pin. The castle nut may be hard to turn if it's been there for a while. In this case, use a breaker bar and socket to try breaking the nut loose. If it's still stubborn, you can use a cutting torch to cut it off. Be cautious not to damage the tie rod or surrounding components.

When’s the Last Time You Replaced Your Tie Rod Ends?
When’s the Last Time You Replaced Your Tie Rod Ends?
How to Change Tie Rods (inner and outer tie rod ends)
How to Change Tie Rods (inner and outer tie rod ends)

With the nut and cotter pin removed, use a wrench to fully unscrew the tie rod end nut and washer. If the nut is too damaged or frozen, it might need to be grinded off. Once the nut is off, you'll need to separate the tie rod end from the steering arm. This is where the fun begins.

Freeing the Stuck Tie Rod End

Spray the stuck tie rod end and surrounding area with a penetrating lubricant. Allow the lubricant to soak for a few minutes to help loosen the seized joint. Using a hammer and a flat-head screwdriver, gently tap around the tie rod end to attempt breaking the rust or corrosion gripping it. Be careful not to damage the threads or surrounding components.

AD

After using the hammer and screwdriver, grab a pickle fork or a similar tool that can fit around the tie rod end. This tool is designed to pop the tie rod end off the steering arm. Gently but firmly rock the tool back and forth while applying pressure. With some elbow grease and a bit of luck, the tie rod end should pop free.

Installing the Replacement Tie Rod End

With the stuck tie rod end removed, you're ready to install a new one. Before starting, ensure the replacement tie rod end is compatible with your vehicle's make, model, and year.

Begin by sliding the new tie rod end into place on the steering arm, ensuring the grooves align correctly. Slip the washer and tie rod end nut onto the tie rod, then loosely thread the nut onto the tie rod end. Coat the threads with some anti-seize compound to help prevent future seizing.

AD

Securing the Tie Rod End

Using a socket and breaker bar, tighten the tie rod end nut by hand as much as possible. Then, fully tighten it using the breaker bar, taking care not to overtighten and strip the threads. With the nut securely tightened, align the hole in the nut with the hole in the tie rod, and insert the cotter pin. Bend the ends of the cotter pin around the nut to secure it.

Reassemble the wheel and lower the vehicle off the jack stands. Torque the lug nuts to your vehicle's recommended specification using a torque wrench. Finally, retighten the lug nuts after driving the vehicle a short distance to ensure everything is properly seated.

Remember, maintaining your vehicle's steering and suspension components is key to safe driving. Regularly lubricate and inspect the tie rod ends to prevent them from seizing up in the future. If the thought of removing a stuck tie rod end still seems daunting, don't hesitate to consult a professional mechanic. Your safety and vehicle performance are worth the investment.

AD
AD