how to remove stihl trimmer head

How to Easily Remove a Stihl Trimmer Head in 3 Steps

By Andrew Robinson
AD

If you're a homeowner with a Stihl trimmer, you'll eventually need to remove the trimmer head for line replacement, cleaning, or maintenance. Don't let this task daunt you; with the right steps, you can remove your Stihl trimmer head like a pro. Let's dive into a step-by-step guide that's easy to follow and SEO-optimized for those searching for "how to remove Stihl trimmer head."

Before you start, gather your tools. You'll need a flathead screwdriver, an adjustable wrench (optional, for some models), and, of course, your Stihl trimmer. Work in a well-lit, secure area, and always follow safety guidelines when handling gardening equipment.

Understanding Your Trimmer Head

First, let's familiarize ourselves with the Stihl trimmer head. The head consists of several components: the spool, the cover, the spool key, the line, and the retaining spring. Knowing these parts will help you navigate the removal process.

AD
Stihl Trimmer Head-How To Rewind A 2 String Head - 25-2
Stihl Trimmer Head-How To Rewind A 2 String Head - 25-2
Stihl Trimmer Head Won’t Come Off: How to Fix? - GardenProfy
Stihl Trimmer Head Won’t Come Off: How to Fix? - GardenProfy
HOW-TO - Stihl String C 25-2 Trimmer Head Replacement - Video
HOW-TO - Stihl String C 25-2 Trimmer Head Replacement - Video

Stihl offers various trimmer heads, but they essentially work the same way. The Adventure, FS, and Farmer series, for instance, use a simple bump-feed system. The trimmer head bumps against the ground, releasing more line as needed. The Speed-Fill and Autoarod systems, found in the Ethos, Professional, and IntelliCarb series, offer semi-automatic and automatic line feeding, respectively. However, the removal process is similar across models.

Preparing to Remove the Trimmer Head

Begin by inspecting your trimmer head. Ensure it's cool and hasn't been used recently to prevent burns. Place your Stihl trimmer on a stable surface, with the head facing up. If your trimmer has a fuel shut-off valve, engage it to prevent fuel leaks.

Stihl Trimmer Head Won’t Come Off: How to Fix? - GardenProfy
Stihl Trimmer Head Won’t Come Off: How to Fix? - GardenProfy
Stihl trimmer won't start or has no power? How to adjust the valves on a Stihl 4 mix. Repair Vlog
Stihl trimmer won't start or has no power? How to adjust the valves on a Stihl 4 mix. Repair Vlog

Locate the spool key on your trimmer head. It's a small, L-shaped piece of plastic or metal. Some models may require an adjustable wrench, so check your Stihl's user manual if you're unsure. Keep this key safe; you'll need it to reassemble the head.

Removing the Trimmer Head

With the trimmer head exposed, it's time to remove it. First, engage the trimmer's lock-off toggle to prevent the head from spinning. It's usually located on the trigger guard or the body of the trimmer.

AD

Now, insert the spool key (or wrench) into the hole in the center of the trimmer head. Turn it counterclockwise to loosen and remove the spool from the trimmer shaft. You might need to apply some force, especially if you haven't removed the head recently. Be careful not to damage the shaft or the spool.

Once the spool is loose, pull it off the shaft. The retaining spring and cover should stay with the spool. If the cover falls off, don't worry; you can reattach it later. With the spool removed, you can now access the line for replacement or repair.

Inspecting and Replacing the Line

Now that your trimmer head is disassembled, take a moment to inspect the line. Look for signs of wear, tears, or kinks. If the line appears damaged or worn out, it's time for a replacement.

AD

Replacing the line is straightforward. For most Stihl trimmers, you'll need a spool of .080" or .095" line, depending on your model. Cut the line to the appropriate length (usually around 10-16 feet), leaving enough room to wind it around the spool. Leave around 6-8 inches of line on each side for the bulbs that poke out of the trimmer head.

Winding the Line

With your line ready, let's wind it onto the spool. Start by inserting the end of the line into the groove on the spool. Hold the line tight against the spool with your thumb or a pen to prevent it from unwinding as you wind.

Begin winding the line clockwise, keeping it in the groove. Leave a slight overlap between each turn, creating a sort of spoke-like pattern. When you've used up most of the line, leave a few inches of line sticking out from the side of the spool. Trim this excess line with a pair of scissors, leaving around 6-8 inches hanging off the spool.

AD

Reassembling the Trimmer Head

With the line replaced and the spool wound, it's time to reassemble the trimmer head. First, reattach the cover to the spool. It should snap firmly into place. If your cover fell off earlier, don't worry; it's designed to be flexible for easy assembly.

Next, insert the retaining spring onto the shaft. The spring helps keep the trimmer head from vibrating during use. It's a small, coiled piece of metal that fits around the shaft.

Now, place the spool, cover, and spring back onto the trimmer shaft. Align the hole in the spool with the center of the shaft. You might need an assistant to hold the spool in place while you screw it back on.

Using the spool key (or wrench), turn the spool clockwise to tighten it. Be careful not to overtighten; you could strip the threads or damage the spool. Hand-tighten the spool as firmly as you can, then give it an extra quarter to half turn.

Finally, test your work by engaging the trimmer's lock-off toggle and giving the trimmer head a gentle bump. The line should-fed smoothly and evenly. If it does, you've successfully removed and reassembled your Stihl trimmer head!

Regular trimmer head maintenance ensures your Stihl trimmer remains in top working condition. The next time you need to replace the line or clean the head, you'll be a pro at removing and reassembling the trimmer head. Happy trimming!

AD