how to remove stand from aoc monitor

Effortlessly Remove Stand from AOC Monitor

By Nicole Thomas
AD

Are you the proud owner of an AOC monitor, but finding the stand a bit of a hindrance when it comes to placement or adjustment? You're not alone. Many users find the stand to be quite versatile but also limiting at times. Removing the stand can open up new possibilities for wall mounting, using a monitor arm, or simply placing it on a flat surface. Here's a step-by-step guide on how to remove the stand from your AOC monitor.

Before we dive into the process, it's crucial to understand that removing the stand will void your warranty. Proceed with caution and ensure you're comfortable with the risks involved. Also, always remember to follow safety guidelines when handling electronic devices.

Understanding Your AOC Monitor's Stand Type

Before removal, it's essential to understand the type of stand your monitor has. AOC offers two primary stand types: tilt-and-swivel and height-adjustable. The process to remove these stands differs slightly due to their construction.

AD
How to Remove Monitor Stand: Easy to Do
How to Remove Monitor Stand: Easy to Do
How to Remove Monitor Stand Easily
How to Remove Monitor Stand Easily
A Monitor Stand Gets a New Purpose
A Monitor Stand Gets a New Purpose

Tilt-and-swivel stands allow you to tilt the monitor backward or forward and swivel it from side to side. Height-adjustable stands, on the other hand, allow you to adjust the height of the monitor. Each stand type has four screws securing it to the monitor, two on each side.

Required Tools

Regardless of the stand type, you'll need the following tools: a Phillips #2 screwdriver, an anti-static wristband (optional but recommended), and a clean, clutter-free workspace.

iMac Standfuß entfernen
iMac Standfuß entfernen
AOC Monitor Screen Issues (How to Troubleshoot) - Ready To DIY
AOC Monitor Screen Issues (How to Troubleshoot) - Ready To DIY

Wearing an anti-static wristband is optional but highly recommended. It helps prevent static discharge, which could potentially damage sensitive electronic components.

Safety First

Before starting, unplug your monitor from the power source. This ensures there's no electrical current running through the unit, preventing potential shocks. Also, lay the monitor face down on a soft, flat surface to avoid damaging the screen.

AD

Once you've safety-checked, you're ready to proceed to the disassembly process.

Removing the Tilt-and-Swivel Stand

Tilt-and-swivel stands are typically easier to remove than height-adjustable ones. Here's how to proceed:

Locate and Remove the Screws

Flip your monitor over and locate the four screws securing the stand. They're usually located on the underside of the monitor, two on each side. Use your Phillips #2 screwdriver to remove these screws.

AD

If the screws are tight or stripped, you might need to apply a little force. Be patient and careful not to damage the screws or the monitor's plastic finish.

Detach the Stand

After removing all four screws, gently lift off the stand. It might take a bit of wiggling, as the stand snaps into the monitor's base. With a little coaxing, it should come right off.

If the stand still won't budge, try using a plastic opening tool or a flathead screwdriver to gently pry it off. Be very careful not to scratch the monitor's base or the stand itself.

AD

Removing the Height-Adjustable Stand

Height-adjustable stands are a bit more challenging due to their internal mechanism. Follow these steps carefully:

Remove the Screws and Base Cover

As with the tilt-and-swivel stand, start by removing the four screws securing the stand. Unlike the tilt-and-swivel stand, you'll also need to remove the base cover to access the stand's internal mechanism.

The base cover usually snaps into place and can be removed using a flathead screwdriver or by carefully prying it off with your hands.

Disconnect the Stand's Internal Mechanism

With the base cover off, you should see the stand's internal mechanism. It's secured by two or four small screws, depending on the model. Use your screwdriver to remove these screws.

Once the screws are removed, carefully disconnect the stand's internal mechanism from the monitor. It might involve gently pulling or twisting the mechanism to disengage it from the monitor's base.

Congratulations! You've successfully removed the stand from your AOC monitor. Now, you're free to wall-mount your monitor, use a monitor arm, or simply place it on a flat surface. Always remember, removing the stand voids your warranty, so proceed with caution. Enjoy your new setup!

AD