how to remove slip on tub spout

How to Remove a Slip-on Tub Spout

By Emily Thomas
AD

Tired of bathtub Splashback? A leaky or damaged tub spout can turn your relaxing soak into a frustrating ordeal. But before you call a plumber or purchase a costly replacement, consider removing and replacing it yourself. This DIY guide walks you through the process of removing a slip-on tub spout, step by step.

Before we dive in, ensure you have the right tools and safety equipment. You'll need a adjustable wrench, an Allen wrench or an adjustable wrench, a putty knife, and possibly some Teflon tape. Also, protect your tub and floors with a few towels to prevent scratches.

Preparing for the Removal

The first step is assembling your tools and preparing your workspace. As mentioned, gather your tools, safety equipment, and protective towels. Additionally, turn off your water supply. The cutoff valve for your tub is typically located near the faucet, behind an access panel, or under the sink.

AD
How to Replace a Tub Spout
How to Replace a Tub Spout
a person's hand holding onto a faucet in a sink
a person's hand holding onto a faucet in a sink
How To: Replace a Tub Spout
How To: Replace a Tub Spout

Once you've turned off the water, open both your hot and cold faucets to drain any residual water. This will make removing the spout much easier and safer.

Locating the Set Screw

With your spout now drained, it's time to locate the set screw. This is usually a small Allen screw or a slotted screw, positioned at the base of the tub spout. It's often hidden from view, so you may need to use a mirror to spot it.

Bath Tub Spout Removal and Installation
Bath Tub Spout Removal and Installation

Once you've located the set screw, use your Allen wrench or adjustable wrench to loosen and remove it. If it's particularly tight, you may need to use some WD-40 or another lubricant to help loosen it. Be cautious not to strip the screw; if you're having trouble, consider calling a professional.

Removing the Spout

With the set screw removed, you can now release the spout from the tub faucet threads. This may require some wriggling and twisting, depending on how tightly the spout is fitted. You can use a putty knife or a flathead screwdriver to gently pry the spout if needed.

AD

If the slip-on spout is still not budging, you can try gripping it with adjustable pliers or a pair of lockjaw pliers to provide extra leverage. By applying gentle pressure and twisting, you should be able to remove the spout with ease.

Installing the New Spout

Now that your old spout is removed, it's time to install the new one. First, ensure your new spout is a compatible model for your faucet. The most common types are thread-on, slip-on, and wall-mount.

If necessary, apply a thin layer of plumber's putty or Teflon tape around the base of the new spout. This will create a watertight seal and prevent leaks. Ensure not to overuse the putty or tape, as excess material can clog the faucet or create a messy install.

AD

Securing the New Spout

Position the new spout onto the faucet, ensuring it's fully seated on the threads. Then, reattach the set screw using your Allen wrench or adjustable wrench. Tighten the screw by hand as much as you can, then secure it further with the wrench. Be careful not to overtighten, as this can strip the screw or cause damage.

Once the set screw is secure, turn the water supply back on. Check for any leaks around the base of the spout or the faucet. If there are no leaks, your new tub spout is successfully installed!

Final Touches

After ensuring your new spout is leak-free, clean up your workspace. Remove the protective towels, dispose of any used materials, and put away your tools. Be sure to store your tools properly to extend their lifespan and make them readily available for future projects.

AD

If you experience any issues during the installation process, don't hesitate to call a professional plumber. They have the expertise and equipment to handle any plumbing issue that may arise. Relax and enjoy your newly upgraded bathtub with your newly installed, leak-free spout!

AD