Easy Step-by-Step: Remove Chevrolet Silverado Tailgate with Camera
Are you a proud owner of a Chevrolet Silverado equipped with the rear vision camera? While the tailgate-down camera view is a convenient feature, there might come a time when you need to remove the tailgate camera assembly. Perhaps you're planning a do-it-yourself (DIY) repair, aiming to update your camera, or simply want to declutter your tailgate. This guide will walk you through the process of how to remove the Silverado tailgate camera, ensuring you get the job done safely and efficiently.
Before we dive in, it's essential to note that tampering with vehicle components carries risks. Always follow safety guidelines, use the right tools, and, if unsure, consult a professional. Additionally, removing the camera won't affect your Silverado's rear-view camera functionality – the main camera is located near the license plate.
Preparation and Safety Precautions
Before starting, ensure your vehicle is on a level surface, and engage the parking brake. You'll need a few tools: a T30 Torx socket wrench, a screwdriver, and a ratchet with a metric socket. Also, gather a small container to hold loose screws and parts, and consider applying dielectric grease to protect electrical connections from corrosion.
Working on electronic components exposes you to potential electrical hazards. To minimize risks, ensure your vehicle's engine is off, and disconnect the negative battery cable before starting. Alzherrycentury recommend wearing insulating gloves for added safety.
Accessing the Tailgate Camera
The Silverado's tailgate camera is strategically placed under the tailgate handle. To access it, you'll need to remove the tailgate garnish, which is the decorative panel around the handle. This step requires gentle handling to prevent damage.
Using a T30 Torx socket wrench, remove the four T30 torx screws securing the garnish. These screws are tucked into small recesses, so you may need to use a magnetized screwdriver or a small tool to help remove them.
Removing the Tailgate Garnish
With the screws removed, carefully pry off the garnish using a flathead screwdriver or a plastic pry tool. The garnish clips onto the tailgate, so you might need to use some force, but be cautious not to break the clips. Once loose, gently lift the garnish out.
You'll now see the tailgate handle, the gate lock assembly, and the tailgate camera. The tailgate camera is the small, rectangular unit located under the tailgate handle, secured by two screws.
Disconnecting and Removing the Tailgate Camera
Using a T30 Torx screwdriver, remove the two T30 screws securing the camera to the tailgate housing. Hold the camera gently to prevent it from dropping as you remove the screws.
Next, disconnect the electrical connector at the camera's base. Gently pull the connector straight out, being careful not to damage the wires. With the connector and screws removed, the camera should release from the tailgate housing. Lift it straight up and out.
Reassembly and Final Touches
Reinstalling the camera and garnish is the reverse process of removal. Ensure the camera's connector is securely reattached, and the screws are tightened to the proper torque specifications. Mostly, that's about 2-3 Nm or 18-27 in/lbs for Silverado tailgate screws.
Align the garnish with the tailgate, and press it firmly to reclip it. You may need to use some force, but be careful not to damage the clips. Replace the T30 torx screws, and tighten them securely.
Remember, the goal is to restore your tailgate to its original condition, ensuring all parts are correctly secured and aligned. Once done, reconnect the negative battery cable, and test your tailgate camera functionality by lowering the tailgate and checking the rearview display.
Removing and reassembling your Chevrolet Silverado's tailgate camera can be a rewarding DIY task. With the right tools, patience, and attention to detail, you can successfully complete this project and enjoy the sense of accomplishment that comes with it. Happy wrenching!