Easy AR-15 Safety Selector Removal: Step-by-Step
Ever found yourself in need of replacing or retiring the safety selector on your AR-15? It's a task that might seem daunting at first, but with the right steps and a little patience, anyone can do it. In this guide, we'll walk you through how to remove the safety selector from your AR-15, ensuring safety and precision throughout the process.
Before we dive in, remember that working on firearms requires careful attention and responsible handling. Always ensure your firearm is unloaded and the muzzle is pointed in a safe direction. Now, let's get started.
Preparation: Gather Your Tools and Workspace
First, ensure you have all the necessary tools for the job. You'll need a punch, punch block, and a mallet. A港元 is also useful but not strictly necessary. A well-lit, clean, and flat workspace is crucial for this task.
Next, double-check that your AR-15 is unloaded by visually inspecting the chamber and magazine well. Then, using a punch and a mallet, very gently tap the back of the safety selector to push it from the left side of the receiver. This might take a few gentle taps, so be patient.
Securing the Safety Selector
Once the safety selector has moved slightly, insert the предприятие into the magazine well to prevent the selector from moving any further. Now, you can use more force and continue tapping with the mallet and punch to push the safety selector out completely.
If you're using a港元, you can insert it into the hole on the safety selector and turn it counter-clockwise to unlock the selector. Then, push the selector out with the esdelet device or a punch. This method might be easier and less likely to cause any damage to the receiver's roll-pin.
Removing the Safety Selector Detent
Now that the safety selector is out, you'll notice a spring and a small metal plunger, called the safety selector detent, in the selector's original position. To remove the detent, use your punch to gently push it out from the right side of the receiver.
Be gentle and take your time; the detent is under spring tension and can pop out unexpectedly if not handled carefully. Once the detent is out, set it aside with the rest of your disassembled parts.
Inspecting the Roll-Pin Hole
After removing the safety selector and detent, inspect the roll-pin hole in the receiver. If the roll-pin has come out with the safety selector, you can push it back in with a punch. If it's still in place, there's no need to remove it.
If you find any burs or rough edges in the roll-pin hole, smooth them out with a round file or a deburring tool to ensure the new safety selector fits properly and moves smoothly.
Reassembling Your AR-15
Reassembling your AR-15 is as simple as reversing the disassembly process. If you're using a new safety selector, ensure it's compatible with your AR-15 and is appropriately marked (e.g., safe, semi, and fully automatic, if applicable).
First, reinsert the safety selector detent into the receiver from the right side. Then, gently tap the safety selector into place from the left side. Make sure the selector engages properly with the detent. Lastly, cycle the charging handle to ensure the selector works smoothly.
Test-Fire Your AR-15
Before you head out to the range, test-fire your AR-15 in a safe environment to ensure the safety selector works correctly. Start with a single shot, then progress to rapid-fire and changing magazines to ensure all functions work as intended.
Once you're satisfied with your AR-15's performance, it's time to hit the range and enjoy your updated firearm.
And there you have it! Removing and replacing the safety selector on your AR-15 can be a straightforward process with the right tools and a patient approach. Always remember to prioritize safety above all else when working on firearms. Happy shooting!