how to remove safety from bic lighter

Remove Safety from Bic Lighter: Step-by-Step Guide

By Ashley Anderson
AD

Are you tired of your BIC lighter's safety feature constantly getting in the way of a smooth lighting experience? Unfortunately, as much as we'd like to bypass it, the safety mechanism is there to stay, complying with strict regulations. But what if you're looking to convert your BIC lighter for remote control or modding purposes? Here's a guide on how to remove the safety feature, keeping in mind, this should only be done for specialized or modding purposes, not for regular use.

Before we proceed, remember that this process involves handling a potentially hazardous item. Always ensure you're working in a well-ventilated area, away from any ignition sources, and electronics that could be damaged by static electricity. Now, let's dive into the process.

Understanding the BIC Lighter Safety Feature

The BIC lighter's safety feature is built into the mechanism that ignites the fuel. It's designed to prevent accidents by only allowing the gas to flow when the trigger is repeatedly pressed and released. This makes the lighter ignition less likely to occur accidentally.

AD
How to Refill a BIC Lighter
How to Refill a BIC Lighter
How to Refill a Bic Lighter - From The Top Method And Bottom
How to Refill a Bic Lighter - From The Top Method And Bottom
Reuse an Extended-Reach (Disposable) BIC Lighter
Reuse an Extended-Reach (Disposable) BIC Lighter

To remove this safety feature, we'll effectively be altering the lighter's mechanism to make it sensitive to a single press, turning it into a continuous flame lighter, much like those used in magic tricks. Again, this is for specialized or modding purposes only.

Materials Needed

To carry out this process, you'll need:

A cool trick
A cool trick
Tutorial: How to install a refill valve on a BIC lighter. Must watch!!
Tutorial: How to install a refill valve on a BIC lighter. Must watch!!
  • A BIC lighter
  • A flathead screwdriver
  • A small hammer or a small, heavy object
  • A pair of pliers
  • A small needle-nose pliers
  • Safety glasses

Safety Precautions

Before you begin, ensure your workspace is clear, well-lit, and free from any flammable materials. Keep a fire extinguisher nearby. Also, always wear safety glasses to protect your eyes from any debris or fuel that may spray out.

Now that we've covered the basics, let's proceed with the process.

AD

Removing the Safety Feature

Brace yourself, as this step is a bit tricky. You'll be slightly disassembling the lighter to gain access to the internal mechanism. Don't worry, though; most BIC lighters can be put back together.

Before you start, make sure the lighter is empty. Gently unscrew and remove the clear plastic fuel tank. Then, gently tap the lighter's body with the hammer or heavy object to loosen the internal mechanism. You might need to use the flathead screwdriver to pry it out.

Accessing the Internal Mechanism

Once you've separated the body from the mechanism, you should see a small, spring-loaded arm. This is what controls the flow of gas. The safety feature is integrated into this arm.

AD

Using the flathead screwdriver, carefully pry off the small plastic piece that covers the arm. You might need to use some force, but be careful not to bend or break the arm itself. Once you've removed the cover, you should see a small pin holding the safety feature in place.

Removing the Safety Pin

Using the pliers, carefully grip the pin and pull it out. Again, use caution to avoid bending or breaking the small metal piece. Once the pin is out, the safety feature should be disabled, turning the lighter into a continuous flame lighter.

To put the lighter back together, carefully re-attach the internal mechanism and the fuel tank. Make sure everything is aligned properly and gently screw the tank back onto the lighter body.

AD

And there you have it, a BIC lighter with no safety feature. Remember, this has been modified for specialized or modding purposes. Always be mindful of the risk and only perform this modification if you're sure you understand the implications and can handle the risk responsibly.

Finally, consider that removing the safety feature might void the lighter's warranty, and it's illegal to sell or distribute these modified lighters. Always ensure you're complying with all local laws and regulations.

AD