how to remove rv window glass

How to Remove RV Window Glass

By James Lewis
AD

RV life is an adventure, but it comes with its share of maintenance tasks. One such task you might face is replacing a broken or scratched RV window glass. Removing RV window glass may seem daunting, but with the right tools and a bit of patience, it's a task you can tackle yourself. This comprehensive guide will walk you through the process step by step.

Before we dive into the process, let's address a common question: why replace the glass instead of the entire window? Replacing the glass is more cost-effective and less time-consuming. It's also a great way to reduce waste, as you're repurposing the frame. So, let's get started.

Gathering Your Materials

First, you'll need to gather your materials. You don't need much, so don't worry about a long shopping list. Here's what you'll need:

AD
two arrows pointing to the left side of a car window seal that has been cracked
two arrows pointing to the left side of a car window seal that has been cracked
How To Remove Outdated RV Window Coverings
How To Remove Outdated RV Window Coverings
RV Glass 101
RV Glass 101
  • New RV window glass
  • Screwdriver (usually a Phillips head)
  • Glass cutting tool or jigsaw
  • Safety goggles
  • Work gloves
  • Masking tape
  • Silicon sealant
  • Putty knife

Measuring and Preparing Your Glass

Before you start, measure the window opening to ensure your new glass will fit perfectly. Many RVs use standard glass sizes, but it's always best to double-check. Once you have your glass, mark the measurements onto it with a marker.

The next step is to carefully cut your glass to size using your glass cutting tool or jigsaw. Remember to wear safety goggles during this step. If you're not comfortable doing this yourself, many hardware stores offer glass cutting services.

How Much Does It Cost to Replace RV Windows? – Vehicle HQ
How Much Does It Cost to Replace RV Windows? – Vehicle HQ
RV Window Replacement And Resealing
RV Window Replacement And Resealing

Removing the Old Glass

Now that you have your new glass ready, it's time to remove the old one. Start by carefully prying off any molding or trim surrounding the window. You can usually do this with a flathead screwdriver. Once the molding is off, you'll see the screws securing the glass in place. Remove these screws using your screwdriver.

With the screws out, the glass should gently pop out of its frame. Be careful here, as the glass is likely to be cracked or broken. Wrap your hands in work gloves to protect from sharp edges. If the glass is heavily cracked or broken, you might want to wear heavy-duty gloves or even cut-resistant gloves for extra protection.

AD

Inserting the New Glass

With the old glass out, it's time to insert the new one. Start by placing the new glass into the frame. Ensure it's properly centered and the measurements are correct. If it's not a tight fit, don't worry. That's where the silicon sealant comes in.

Sealing the Glass

Using your putty knife, apply a bead of silicon sealant around the edge of your new glass. This will not only keep water out but also help to hold the glass in place. Be sure to apply the sealant evenly and smoothly.

Once you've applied the sealant, place the molding or trim back onto the window. Secure it with the screws you removed earlier. Be sure to screw it in gently to avoid breaking the new glass.

AD

Allowing the Sealant to Dry

Finally, let the sealant dry completely before using your window. This could take anywhere from a few hours to a full day, depending on the specific sealant you used. Always follow the instructions provided with your sealant for the most accurate drying time.

That's it! You've successfully removed and replaced your RV window glass. Regular maintenance like this will keep your RV in top condition, ready for your next adventure. Don't forget to store your tools safely away for future use. Happy travels!

AD