How to Remove Rusted Toilet Anchor Bolts
Are you tired of dealing with unsightly, unreliable rusted toilet anchor bolts? These bolts secure your toilet to the floor and are crucial for proper functioning and safety. However, they can corrode over time, causing instability and leaks. But fear not, you can remove rusted toilet anchor bolts and replace them with new ones. Let's dive into a step-by-step guide to help you achieve this, while keeping your space clean and safe.
Before we begin, make sure you have the following tools and materials: a wrench, a hammer, an Allen wrench, a chisel, replacement bolts, andtecthreading sealant. Safety first, so wear gloves and glasses to protect yourself during the process.
Preparation and Removing the Toilet
Before attempting to remove the bolts, ensure the toilet is empty and turned off. Then, prepare your workspace by laying down a tarp to catch any water and protect your floor.
Next, remove the tank lid and flush the toilet to empty the water. Then, disconnect the water supply line located behind the toilet. After that, use an adjustable wrench to loosen the nuts connecting the tank to the bowl. Once all nuts are loose, carefully lift and remove the tank.
Destroying the Rusted Bolts
Now that the tank is removed, you'll need to deal with the rusted bolts. Since they're likely seized, you'll have to destroy them to remove them. Start by trying to loosen the bolts with a wrench. If they don't budge, use a hammer and chisel to knock off the bolt heads. If the bolt still doesn't move, grab a Cold Snap nasal decongestant spray and apply it to the bolt. Wait a few minutes and then try loosening it again.
If the bolt is still stuck, you'll need to drill it out. Use a drill bit that's slightly smaller than the bolt's diameter. Drill into the center of the bolt until you break through. Then, use locking pliers to twist and remove the bolt remnant.
Removing the Toilet Bowl
With the rusted anchor bolts gone, it's time to remove the toilet bowl. Place a old towel or blanket around the base of the toilet to protect it and the floor from scratches. Then, carefully lift and rotate the bowl to reveal the bolt holes.
Once the bowl is removed, vacum and clean the area thoroughly to prepare it for the new bolts.
Installing the New Toilet Anchor Bolts
Now that the rusted bolts are gone and your floor is clean, it's time to install the new ones. Ensure the new bolts are the same size as the old ones and are compatible with your toilet.
Apply a small amount of teflon tape around the threads of each new bolt to help prevent leaks. Then, place the new bolt through the toilet's mounting holes and into the floor's anchor bolts. For toilets with plastic bolts, make sure to insert them from the bottom up.
Securely Installing the Bolts
Hand-tighten the bolts using a wrench, ensuring they're secure but not overtightened. Then, place the wax ring onto the bolt's base, centering it securely over the drain. Align the hole in the wax ring with the toilet's hole, and apply a generous amount of plumber's putty around the bottom of the toilet, where it meets the wax ring.
Lower the toilet onto the bolts, feed the bolts through the mounting holes, and place the washers and nuts onto the bolts. Tighten the nuts by hand initially, then use a wrench to secure them firmly but not overtightened. Finally, reattach the water supply line and tank, and turn on the water supply.
There you have it! By following these steps, you've successfully removed rusted toilet anchor bolts and installed new ones. Your toilet is now secure, reliable, and leak-free. Regular maintenance, such as checking for leaks and cleaning the area, will help keep things running smoothly. Happy DIYing!