Recharge: "How to Remove Roomba Battery & Replace"
Do you find your Roomba not charging or running as it should? The reason might be a faulty battery. Replacing it could be the solution. But how do you remove Roomba battery? here's a step-by-step guide to help you understand the process.
Before you start, ensure you have the following tools at hand: a flathead screwdriver, a #2 Phillips screwdriver, and a flat object like a card or a thin piece of plastic. Unplug your Roomba from its charging dock and make sure it's powered off.
Understanding the Roomba Battery
The Roomba uses a 1800 mAh nickel-metal hydride battery. It's a sealed unit, which means it's not replaceable by the user. However, you can replace the entire battery pack when it's no longer holding charge well.
In newer models, the battery pack can sometimes bulge slightly when it's fully charged. But if it's swollen or leaking, it's a sure sign that it needs replacing.
Preparation: Positioning Your Roomba
To remove the battery, you'll need to flip your Roomba over. Place it on a flat surface that will allow you to work on it comfortably. Use the lifting tab at the bottom to tilt the device up slightly.
If your Roomba doesn't have a lifting tab, you can use the flat object to lift the entire unit slightly from underneath. Position it so the bottom of the Roomba is facing up towards you.
Removing the Bottom Cover
The bottom cover has several screws. Using your #2 Phillips screwdriver, carefully unscrew each screw and put them in a safe place. You'll need 12 screws in total - 4 small screws at the corners and 8 larger ones around the outer rim.
Once all screws are removed, the bottom cover should lift off. If it's not budging, make sure you've taken out all the screws. You might need to use a putty knife or a thin plastic object to carefully pry the cover loose.
Accessing the Battery Compartment
With the bottom cover off, you'll see the battery compartment. The battery pack is held in place by clips. These are hidden under two flaps at the back of the compartment.
Be careful as you lift the flap. It can be tough to handle, and you don't want to break it. Underneath the flap, you'll find the battery pack's release tabs. These keep the battery secure.
Releasing the Battery Pack
Press the tabs inward simultaneously. This will release the battery pack. Now, gently pull the battery pack out of the compartment. It should slide out with a little bit of resistance. If it's stuck, don't force it. Check if you've pressed the tabs all the way in.
Once the battery pack is out, you can examine it. Check for any signs of damage or wear, and if necessary, replace it with a new one.
Installing the New Battery Pack
If you're installing a new battery, ensure it's compatible with your Roomba model. The installation process is just the reverse of the removal process. Align the battery pack with the compartment, press the tabs in, and then slide the pack back in until it clicks into place.
Now, replace the bottom cover. Secure it with the screws you took off earlier. Once all the screws are back in place, your Roomba is ready to go, charged with its new battery.
Remember, batteries over time lose their ability to hold a charge. It's normal for the battery to need replacement every 12-18 months, depending on usage. And always follow the manufacturer's guidelines for charging to prolong the battery's life.