how to remove rear wiper

How to Remove Rear Wiper: Step-by-Step Guide

By Jessica Thomas
AD

A gusty storm has just passed, leaving your car with a thick layer of grime. You decide to clean it up, but notice your rear wiper isn't working as it should. There could be several reasons for this - perhaps it's making excessive noise, or it's leaving streaks across your window. Today, we're going to guide you through the process of how to remove your rear wiper, enabling you to inspect, clean, or replace it as needed.

Remember, safety is paramount when working on your vehicle. Always ensure you're parked on a flat surface and engaged the parking brake. Now, let's dive into our step-by-step guide.

Preparation and Diagnosing the Issue

Before we start removing the wiper, it's crucial to understand the problem. Let's kick off by diagnosing the issue and gathering the necessary tools.

AD
How to Remove Rear Wiper Arm - Audi A4 S4 RS4 - B6 B7 - Avant Estate - TOTAL TECHNIK
How to Remove Rear Wiper Arm - Audi A4 S4 RS4 - B6 B7 - Avant Estate - TOTAL TECHNIK
FAQs about WiperTags installation and care, attaching to rear wipers
FAQs about WiperTags installation and care, attaching to rear wipers
How to Remove Wiper Arm Without Puller
How to Remove Wiper Arm Without Puller

Inspect your rear wiper arm and motor. Check if the arm is moving as it should or if it's jammed. Listen for any unusual noises when you turn the wiper switch on. Also, look for signs of damage, such as cracks or corrosion, on the wiper motor or arm.

Gathering Tools

Now that you have a fair idea of the problem, let's gather the tools needed to remove the rear wiper. You'll likely need:

How to Remove a Windshield Wiper Arm - Smart ForTwo
How to Remove a Windshield Wiper Arm - Smart ForTwo
2013 To 2019 Ford Escape How To Change Rear Wiper Blade With Size & Part Numbers - Quick & Easy
2013 To 2019 Ford Escape How To Change Rear Wiper Blade With Size & Part Numbers - Quick & Easy
  • Socket wrench or screwdriver ( depending on the type of fasteners holding the wiper motor)
  • Rubber gloves (for safety)
  • Plastic putty knife or flathead screwdriver (for prying)
  • WD-40 or another penetrating oil/lubricant (if the fasteners are rusty)

Preventing Wiper Damage

Before we begin, let's learn how to disable the wiper motor's power supply to prevent accidental damage. This step is crucial to ensure your wipers don't start moving while you're working on them.

  1. Locate the car's fuse box, usually found under the hood or beneath the steering column.
  2. Consult your car's owner manual to identify the rear wiper fuse. It might be labeled as such or could be part of a combination fuse covering various rear functions.
  3. Remove the fuse temporarily to disable the wiper motor's power supply.

Removing the Rear Wiper Arm and Motor

Now that we're all set, let's proceed with removing the rear wiper arm and motor. Follow these steps carefully:

AD

Removing the Wiper Arm

The wiper arm is the visible part of the wiper that moves across the windshield. Here's how to remove it:

  1. Lift the wiper arm slightly away from the rear window.
  2. Look for a pin, nut, or bolt at the base of the wiper arm where it connects to the wiper motor. This could be hidden under a plastic cap or cover, which you'll need to remove.
  3. Using your socket wrench or screwdriver, loosen and remove the retaining pin, nut, or bolt. You might need to use penetrating oil if it's too tight or rusty.
  4. Carefully remove the wiper arm from the wiper motor.

Removing the Wiper Motor

The wiper motor is the powerhouse behind the wiper arm. It's usually attached to the vehicle's body or the rear hatch. Here's how to remove it:

  1. Trace the wiper arm and locate the wiper motor. It might be hidden behind the rear trunk panel or under the rear seat.
  2. Remove any covers or shrouds protecting the wiper motor.
  3. Locate the fasteners holding the wiper motor in place. These are usually bolts or screws.
  4. Using your socket wrench or screwdriver, loosen and remove the fasteners. Again, penetrating oil might be necessary if the fasteners are rusty or tight.
  5. With the fasteners removed, carefully pull out the wiper motor from its mounting location.

There you have it! You've successfully removed your rear wiper arm and motor. Inspect, clean, or replace the components as needed, and then reinstall them following the reverse process. Don't forget to reinsert the wiper fuse before testing your newly reinstalled wiper system.

AD

Regular maintenance and care for your rear wiper can go a long way in ensuring its longevity and performance. Next time it storms, you'll be ready with a clean, perfectly functioning rear wiper. Happy driving!

AD