how to remove rear shocks for harley softail

Mastering Harley Softail: Step-by-Step Rear Shock Removal

By Anthony Robinson
AD

Tackling the project of removing rear shocks on your Harley Softail can seem daunting, but with the right steps and tools, it's a task you can accomplish. Let's dive into the process, making sure to follow safety measures and use only the best tools for the job.

Before you begin, ensure you have the necessary equipment: a suitable jack, jack stands, metric sockets, a breaker bar, line wrench, pickle fork, and grease straw. Safety is paramount, so gear up in your riding gloves and eye protection. Now, let's get started.

Preparation: Safety and Tools

First things first, safety. Park your bike on a level surface and use the center stand to stabilize it. Next, apply the parking brake for an extra layer of security. Working on your bike's suspension requires it to be completely upright, so do not remove the center stand. Instead, use a suitable jack to lift the swingarm until the rear wheel is completely off the ground.

AD
How to Adjust Shock Stiffness on a Motorcycle with Burly Slammers
How to Adjust Shock Stiffness on a Motorcycle with Burly Slammers
Harley Softail Shock Adjustment
Harley Softail Shock Adjustment
Harley Davidson Softail Ultima narrow body. Shocks adjustable suspension www.customcruisers.com
Harley Davidson Softail Ultima narrow body. Shocks adjustable suspension www.customcruisers.com

While your bike is lifted, place jack stands underneath the engine cases to provide stability and support. Set your jack down safely to the side, ensuring it's within reach in case you need to lower the bike.

Removing the Rear Sprocket and Chain

To access the rear shocks, you'll need to remove the sprocket and chain. Start by removing the rear wheel speedo drive. Using a line wrench, loosen the nut and Removal the drive from the wheel. Next, remove the rear axle nut with a breaker bar and a socket. Use some force here, it might be tight.

How To Rebuild a Motorcycle Shock
How To Rebuild a Motorcycle Shock
How To Remove a Rear Motorcycle Wheel - YouMotorcycle
How To Remove a Rear Motorcycle Wheel - YouMotorcycle

Now, you can slip the wheel and sprocket off the axle. It may take some dabbling, so be patient. Set the wheel aside, but keep it readily available for reassembly. Now you have clear access to the rear sprocket and chain, which should be removed as well to avoid interference during shock removal.

Removing the Rear Axle and Swingarm

The rear axle is secured by a pinch bolt. Unthread the nut and washer from the left end of the axle, then remove the axle from the bike. It might be a cinch, but it could stick, so take your time.

AD

With the axle removed, the swingarm should now slide out. Remember, your bike's center stand is still in place, so the swingarm should just lift straight out. If it's stuck, double-check you removed everything, including the speedo drive, chain, and axle. Once the swingarm is free, lower it to the ground safely and set it aside.

Removing the Rear Shocks

Finally, you're at the rear shocks! They're held in place by pinch bolts, similar to the rear axle. Begin by removing the upper pinch bolt, then support the shock so it doesn't slide out suddenly. Remove the lower pinch bolt and slowly lower the shock until it's free from the hand slot.

Repeat this process for the second shock. Grease the shock shaft castellations with grease using a grease straw to help lubricate it and prevent re-setting issues. Now that your shocks are out, you can service or replace them as needed.

AD

Reassembly

When reinstalling, make sure to lubricate the shock shaft with some grease to ensure smooth operation. Reassemble the swingarm, rear axle, wheel, sprocket, and chain in the reverse order of disassembly. Tighten all bolts to the specified torque value, referring to your Harley-Davidson workshop manual.

Lower your bike gently from the jack stands, remove the stands, and give your Softail a quick once-over to ensure everything is properly seated and ready for the road.

There you have it! You've successfully removed your Harley Softail's rear shocks. Now, get out there and ride with confidence, knowing you've taken care of your bike's suspension like a seasoned pro. Happy riding!

AD
AD